TA48L018,02,025,03,033,05F
2010-04-30
1
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA48L018F, TA48L02F, TA48L025F,
TA48L03F, TA48L033F, TA48L05F
1.8 V, 2 V, 2.5 V, 3 V, 3.3 V, 5 V
Three-Terminal Low Dropout Voltage Regulator with Output Current of 0.15 A
The TA48L**F series consists of fixed-positive-output,
low-dropout regulators with an output current of 0.15 A (max)
that utilize V-PNP transistors for the output stage. In response to
the need for low-voltage and low-power dissipation devices for use
in consumer electronics and industrial appliances, the series
offers devices with low output voltages: 1.8 V, 2 V, 2.5 V, 3 V, 3.3
V, 5 V.
Features
z Maximum output current: 0.15 A
z Output voltage accuracy: V
OUT
± 3% (@T
j
= 25°C)
z Low standby current: 400 μA (typ.) (@I
OUT
= 0 A)
z Low-dropout voltage: V
D
= 0.5 V (max) (@I
OUT
= 100 mA)
z Protection function: Overcurrent/Thermal shutdown
z Package type: PW-Mini (SOT-89) package
Pin Assignment / Marking
Part No.
(or abbreviation code)
Part No.
AI TA48L018F
BI TA48L02F
CI TA48L025F
DI TA48L03F
EI TA48L033F
Note 2
FI TA48L05F
Note 1: A line beside a Lot No. identifies the indication of product Labels.
Without a line: `Pb`/INCLUDES > MCV
With a line: `G`/RoHS COMPATIBLE or `G`/RoHS `Pb`
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27
January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
The product(s) in this document (“Product”) contain functions intended to protect the Product from
temporary small overloads such as minor short-term overcurrent or overheating. The protective functions
do not necessarily protect Product under all circumstances. When incorporating Product into your system,
please design the system (1) to avoid such overloads upon the Product, and (2) to shut down or otherwise
relieve the Product of such overload conditions immediately upon occurrence. For details, please refer to
the notes appearing below in this document and other documents referenced in this document.
Weight: 0.05 g (typ.)
A I
Part No.
(or abbreviation code)
Note 2
Note 1
Lot No.
(weekly code)
3
2 1
3
1:IN
2:OUT
3:GND
