www.wihatools.com
Wiha Quality Tools
Germany
87
Blade
CVM tool steel, hardened
to average 58/60RC
Responds to OSHA’s use
specification 29 CFR1910
Insulation
molded directly
onto the blade f
or
permanent bonding
SoftFinish
®
handle
solid molded core
with soft outer
cushion grip. 40%
more torque than
conventional handles
Phillips Screwdriver, With Wiha-SoftFinish
®
Handle
Insulation According to ASTM F-1505-01, New VDE Specification
0682/part 201 and EN/IEC 60900, NFPA70E, up to 1000 Volt.
Individually Tested. Blade high alloy chrome-vanadium-molybdenum
steel, hardened, black finish. Insulation molded directly onto blade.
Wiha-SoftFinish
®
handle, multi-component, cushion grip.
Item
No. Size mm Inch mm Inch lbs. pkg.
321 00 0 60 2.4 164 6.5 .06 10
321 01 1 80 3.1 191 7.5 .12 10
321 02 2 100 3.9 218 8.6 .20 10
321 03 3 150 5.9 268 10.6 .34 10
321 04 4 200 8.0 318 12.5 .39 10
320
Insulation Test Standards:
Insulation according to EN/IEC 60900,
ASTM F-1505-01, New VDE 0682/part
201, DIN 7437, NFPA70E
Each tool individually tested to
10,000 volts and certified to
1000 Volt ac or 1500 Volt dc
1000V
Slotted Screwdriver, With Wiha-SoftFinish
®
Handle
Insulation According to ASTM F-1505-01, New VDE Specification
0682/part 201 and EN/IEC 60900, NFPA70E, up to 1000 Volt.
Individually Tested. Blade high alloy chrome-vanadium-molybdenum
steel, hardened, black finish. Insulation molded directly onto blade.
Wiha-SoftFinish
®
handle, multi-component, cushion grip.
Item
No. mm Inch mm Inch mm Inch lbs. pkg.
320 05 2.0 .078 60 2.4 164 6.5 .05 10
320 10 2.5 .098 75 3.0 179 7.1 .06 10
320 12 3.0 .118 100 3.9 204 8.0 .07 10
320 15 3.5 .139 100 3.9 204 8.0 .07 10
320 17 4.0 .157 100 3.9 211 8.3 .12 10
320 23 4.5 .177 100 3.9 211 8.3 .12 10
320 24 4.5 .177 125 5.0 236 9.3 .12 10
320 27 4.5 .177 150 5.9 261 10.2 .14 10
320 25 4.5 .177 175 7.0 286 11.2 .13 10
320 28 4.5 .177 200 8.0 311 12.3 .15 10
320 31 5.5 .216 125 5.0 243 9.5 .15 10
320 26 5.5 .216 175 7.0 293 11.5 .21 10
320 34 6.0 .236 150 5.9 268 10.6 .21 10
320 39 6.5 .255 150 5.9 268 10.6 .21 10
320 42 8.0 .315 175 7.0 299 11.8 .34 10
320 45 10.0 .393 200 8.0 318 12.5 .39 10
321
320 90
Set 4 Pcs. Slotted & Phillips
Item
No. mm mm mm Size mm .76 lbs.
320 90 320 15 3.5 100 0.6 321 01 1 80
320 24 4.5 125 1.0 321 02 2 100
#32892
page 93
Wiha Insulated Screwdrivers with SoftFinish
®
Cushion Grip Handle
1000Volt
1000Volt
1000Volt
Warning!
Insulated tools are not intended for use on live or energized circuits. Always
disconnect and de-energize all equipment & circuits. NEVER!
work on live
or energized circuits or equipment.
Use & Care Guide For Insulated Tools:
Store tools to minimize risk of damage to insulation
Inspect insulation prior to each use of any insulated tool
If you doubt the integrity of the insulation destroy the tool or have it retested
Use insulated tools where the ambient temperature is between -20 to +70
O
C
Have a qualified safety technician inspect and re-certify tools annually for safe use
I
N
D
E
X
SHOP
SHOP
SHOP
PREVIOUS NEXT
Go To
Image Index
Go To
Numerical Index
