Panasonic Corporation 2013©
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
Narrow pitch connectors A4F (0.4mm pitch)
–2–
ACCTB26E 201310-T
PRODUCT TYPES
Notes: 1. Order unit:
For volume production: 1-inner carton (1-reel) units
Samples for mounting check: 50-connector units. Please contact our sales office.
Samples: Small lot orders are possible. Please contact our sales office.
2. Please contact us for connectors having a number of pins other than those listed above.
SPECIFICATIONS
Characteristics
Mated height Number of pins
Part number Packing
Socket Header Inner carton (1-reel) Outer carton
0.6mm
10 AXE310124 AXE410124
5,000 pieces 10,000 pieces
12 AXE312124 AXE412124
16 AXE316124 AXE416124
20 AXE320124 AXE420124
22 AXE322124 AXE422124
24 AXE324124 AXE424124
26 AXE326124 AXE426124
30 AXE330124 AXE430124
34 AXE334124 AXE434124
36 AXE336124 AXE436124
40 AXE340124 AXE440124
42 AXE342124 AXE442124
44 AXE344124 AXE444124
50 AXE350124 AXE450124
54 AXE354124 AXE454124
60 AXE360124 AXE460124
64 AXE364124 AXE464124
70 AXE370124 AXE470124
Item Specifications Conditions
Electrical
characteristics
Rated current 0.3A/pin contact (Max. 5 A at total pin contacts)
Rated voltage 60V AC/DC
Breakdown voltage 150V AC for 1 min.
No short-circuiting or damage at a detection current of 1 mA
when the specified voltage is applied for one minute.
Insulation resistance Min. 1,000MΩ (initial) Using 250V DC megger (applied for 1 min.)
Contact resistance Max. 90mΩ
Based on the contact resistance measurement method
specified by JIS C 5402.
Mechanical
characteristics
Composite insertion force Max. 1.200N/pin contacts × pin contacts (initial)
Composite removal force Min. 0.165N/pin contacts × pin contacts
Contact holding force
(Socket contact)
Min. 0.20N/pin contacts
Measuring the maximum force.
As the contact is axially pull out.
Environmental
characteristics
Ambient temperature –55°C to +85°C No freezing at low temperatures. No dew condensation.
Soldering heat resistance
Peak temperature: 260°C or less (on the surface of
the PC board around the connector terminals)
Infrared reflow soldering
300°C within 5 sec. 350°C within 3 sec. Soldering iron
Storage temperature
–55°C to +85°C (product only)
–40°C to +50°C (emboss packing)
No freezing at low temperatures. No dew condensation.
Thermal shock resistance
(header and socket mated)
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
Conformed to MIL-STD-202F, method 107G
Humidity resistance
(header and socket mated)
120 hours,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Saltwater spray resistance
(header and socket mated)
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
Bath temperature 35±2°C,
saltwater concentration 5±1%
H2S resistance
(header and socket mated)
48 hours,
contact resistance max. 90mΩ
Bath temperature 40±2°C, gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Lifetime
characteristics
Insertion and removal life 30 times
Repeated insertion and removal speed of max. 200 times/
hours
Unit weight 20 pin contact type: Socket: 0.01 g Header: 0.01 g
Order Temperature (°C) Time (minutes)
1
2
3
4
–55
85
–55
0
−3
30
Max. 5
30
Max. 5
+3
0
0
−3