1. General description
The 74ALVC541 is an octal non-inverting buffer/line drivers with 3-state bus compatible
outputs. The 3-state outputs are controlled by the output enable inputs OE
0 and OE1.
A HIGH on OE
n causes the outputs to assume a high-impedance OFF-state.
2. Features and benefits
Wide supply voltage range from 1.65 V to 3.6 V
Complies with JEDEC standard:
JESD8-7 (1.65 V to 1.95 V )
JESD8-5 (2.3 V to 2.5 V)
JESD8B/JESD36 (2.7 V to 3.6 V)
3.6 V tolerant inputs/outputs
CMOS LOW power consumption
Direct interface with TTL levels (2.7 V to 3.6 V)
Power-down mode
Latch-up performance exceeds 250 mA
ESD protection:
HBM JESD22-A114E exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
3. Ordering information
74ALVC541
Octal buffer/line driver; 3-state
Rev. 3 — 20 January 2014 Product data sheet
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74ALVC541D 40 Cto+85C SO20 plastic small outline package; 20 leads;
body width 7.5 mm
SOT163-1
74ALVC541PW 40 Cto+85C TSSOP20 plastic thin shrink small outline package; 20 leads;
body width 4.4 mm
SOT360-1
74ALVC541BQ 40 Cto+85C DHVQFN20 plastic dual-in-line compatible thermal enhanced
very thin quad flat package no leads; 20 terminals;
body 2.5 4.5 0.85 mm
SOT764-1
