OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

DS1110E-100+

P1-P3P4-P6P7-P8
DS1110
10-Tap Silicon Delay Line
_____________________________________________________________________ 7
between the input and each tap. Each tap is selected
and connected to the counter by a VHF switch-control
unit. All measurements are fully automated, with each
instrument controlled by a central computer over an
IEEE-488 bus.
Output
Each output is loaded with the equivalent of one 74FO4
input gate. Delay is measured at the 1.5V level on the
rising and falling edge.
INPUT CONDITION
Ambient Temperature +25°C ±3°C
Supply Voltage (V
CC
) 5.0V ±0.1V
High = 3.0V ±0.1V
Input Pulse
Low = 0.0V ±0.1V
Source Impedance 50Ω max
Rise and Fall Time 3ns max
Pulse Width 500ns (1µs for -500ns)
Period 1µs (2µs for -500ns)
Table 2. Test Conditions
Note: The above conditions are for test only and do not restrict
the operation of the device under other data sheet conditions.
Chip Information
TRANSISTOR COUNT: 6813
Selector Guide
PART
TEMP RANGE
PIN-
PACKAGE
TOTAL
DELAY
(ns)*
DS1110E-50
-40°C to +85°C 14 TSSOP
50
DS1110E-60
-40°C to +85°C 14 TSSOP
60
DS1110E-75
-40°C to +85°C 14 TSSOP
75
DS1110E-80
-40°C to +85°C 14 TSSOP
80
DS1110E-100
-40°C to +85°C 14 TSSOP
100
DS1110E-125
-40°C to +85°C 14 TSSOP
125
DS1110E-150
-40°C to +85°C 14 TSSOP
150
DS1110E-175
-40°C to +85°C 14 TSSOP
175
DS1110E-200
-40°C to +85°C 14 TSSOP
200
DS1110E-250
-40°C to +85°C 14 TSSOP
250
DS1110E-300
-40°C to +85°C 14 TSSOP
300
DS1110E-350
-40°C to +85°C 14 TSSOP
350
DS1110E-400
-40°C to +85°C 14 TSSOP
400
DS1110E-450
-40°C to +85°C 14 TSSOP
450
DS1110E-500
-40°C to +85°C 14 TSSOP
500
PART TEMP RANGE
PIN-
PACKAGE
TOTAL
DELAY
(ns)*
DS1110S-50 -40°C to +85°C 16 SO 50
DS1110S-60 -40°C to +85°C 16 SO 60
DS1110S-75 -40°C to +85°C 16 SO 75
DS1110S-80 -40°C to +85°C 16 SO 80
DS1110S-100 -40°C to +85°C 16 SO 100
DS1110S-125 -40°C to +85°C 16 SO 125
DS1110S-150 -40°C to +85°C 16 SO 150
DS1110S-175 -40°C to +85°C 16 SO 175
DS1110S-200 -40°C to +85°C 16 SO 200
DS1110S-250 -40°C to +85°C 16 SO 250
DS1110S-300 -40°C to +85°C 16 SO 300
DS1110S-350 -40°C to +85°C 16 SO 350
DS1110S-400 -40°C to +85°C 16 SO 400
DS1110S-450 -40°C to +85°C 16 SO 450
DS1110S-500 -40°C to +85°C 16 SO 500
*Custom delays are available.
DS1110
10-Tap Silicon Delay Line
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
8 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2002 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
Package Information
For the latest package outline information, go to www.maxim-ic.
com/packages.
TOP VIEW
15
14
13
12
11
10
9
2
3
4
5
6
7
8
N.C.
TAP1
TAP3
TAP5TAP4
TAP2
N.C.
N.C.
161V
CC
IN1
TAP7
TAP9
TAP10GND
TAP8
TAP6
SO (300mil)
DS1110S
Pin Configurations (continued)
P1-P3P4-P6P7-P8

DS1110E-100+

Mfr. #:
Buy DS1110E-100+
Manufacturer:
Maxim Integrated
Description:
Delay Lines / Timing Elements 10-Tap Silicon Delay Line
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet