DATASHEET
Filters FN 761X
IEC/EN 60939 approval
Rated currents from 10 to 100 A
5 kV pulse test capability
Class Y2 capacitor
Technical specifications
Maximum continuous operating voltage
300 VAC, 50/60 Hz (ENEC)
250 VAC, 50/60 Hz (UL)
1000 VDC max.
Rated currents
10 to 100 A @ 60°C max.
Capacitor class
Y2
High potential test voltage
3000 VDC for 2 sec
Insulation resistance (100VDC after 60 sec)
<0.33 μF, R >15,000 MΩ
>0.33 μF, τ >5000 s
Temperature range (operation and storage)
-40°C to +100°C (40/100/21)
Flammability corresponding to
UL 94 V-2 or better
MTBF @ 60°C/300 V (Mil-HB-217F)
<200 A: >675,000 hours
≥200 A: >494,000 hours
Operating frequency
DC to 60 Hz
Approvals
Feedthrough filters offer a high insertion loss across a
broad band of frequencies from a few tens of kHz up
to the GHz region. In general, feedthrough filters offer
a higher level of EMI suppression than feedthrough
capacitors of the same current rating. This is
particularly relevant to applications where source
impedance is smaller than 50 Ω. Different versions are
available offering a wide selection on operating
currents and performance levels. AC feedthrough
filters are designed and approved for up to 300 VAC
50/60 Hz operation.
Features and benefits
Very low internal series inductance
Very high self-resonant frequency
Self-healing dielectric
High quality and reliability
Through-bulkhead mounting
Anti-twist protection
Custom-specific or dual-versions on request
Typical applications
Power line filter for 110/240 VAC power lines
Increasing system and information security
Power supplies
Switching and cellular equipment
Computer servers
UPS power supplies
Medical equipment
Shielded rooms
Typical electrical schematic