Raychem
Devices
TITLE:
IN-LINE SEALED CRIMP SPLICE
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
Raychem
Devices
DOCUMENT NO.:
W-095-04/-08
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS
IN MICRON
Tyco Electronics reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
REV:
C1
DATE:
May 1, 2014
REVISED BY:
UNGUYEN
CAGE CODE:
06090
ECO NUMBER:
ECO-14-006505
SCALE:
NTS
SIZE:
A
SHEET:
1 of 1
© 2014 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
CUSTOMER DRAWING
Splice Crimp Splice Sealing Sleeve
Product
Name
Bar øA øB C D E Corresponding* Min. I.D. Min. I.D.
Color
Code
0.08
(±0.003)
0.05
(±0.002)
0.25
(±0.010)
0.25
(±0.010)
max to CMA Supplied Fully
Recovered
W-095-04 Red 1.96
(0.077)
1.22
(0.048)
12.70
(0.500)
5.97
(0.235)
0.38
(0.015)
304 - 1510 3.18
(0.125)
0.63
(0.025)
W-095-05 Blue 2.62
(0.103)
1.70
(0.067)
14.61
(0.575)
6.86
(0.270)
0.51
(0.020)
779 - 2680 3.18
(0.125)
0.63
(0.025)
W-095-06 Yellow 3.81
(0.150)
2.54
(0.100)
14.61
(0.575)
6.86
(0.270)
1.27
(0.050)
1900 - 6755 4.72
(0.186)
1.57
(0.062)
W-095-08** 2XBlue 2.62
(0.103)
1.65
(0.065)
14.61
(0.575)
6.86
(0.270)
0.51
(0.020)
754 - 1900 3.18
(0.125)
0.63
(0.025)
*For possible wire combinations, refer to table below, CMA – (circular mil area) of common conductors.
**This part is use for 2x AWG 22 to AWG 18.
AWG 26 24 22 20 18 16 14 12
Strands 19 19 19 19 19 19 19 37
CMA 304 475 754 1216 1900 2426 3831 6088
MATERIALS
1. CRIMP SPLICE: Tin plated copper, see Splice Bar Color Code in table above.
2. BASE METAL: Copper Alloy 101 or 102 per ASTM-B280,
3. PLATING: Tin plated per ASTM-B545, ASTM-B339.
4. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyolefin. Color: see table.
APPLICATION
1. These devices provide an immersion resistant sealed in-line crimp splice for single wire splicing. Multiple in-line
assemblies are also possible within the size range shown in the table above.
2. It is suitable for use with wire whose insulation material is rated at 95C minimum.
3. The device is rated at 105C.
4. For installation procedure, see RPIP-685-00.
