Antenna type Module - SPP
Unit: mm
Block Diagram
Outline
Features
General Electrical Specification
EYSFDCAXX-XT
Note: The above PRELIMINARY data are not guaranteed and are subject to change without notice.
The
Bluetooth
®
word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO.,LTD. is under license.
31
15
max
3
PIO[7]
RF+BB I/O
Balun
Filter
X'tal
Flash ROM
USB<D+,D->
VDD<3.3V>
RESET
GND
UART[4]
PCM[4]
Antenna
•The module is a Max.4dBm(Class2) module.
•Bluetooth
®
standard Ver. 2.1+EDR conformity.
•Internal baseband clock oscillator.
•Support functions.
Hold, Sniff, Park, AFH, Faster Inquiry & Connection,
EDR, SSP, SSR, EIR, EPR
•Interface: UART, PCM
•Protocol stack: Under HCI firmware.
•Outline: 31x 15 x 3 mm (Max.)
•Complete Lead Free
•RoHS (2002/95/EC) Conformity
•Embedded – SPP
•Modular Type Approval
Parameter Description Min. Typ. Max. Units
Carrier Frequency 2.402 2.480 GHz
Operating Voltage (VDD) UART Interface 3 3.3 3.6 V
RF Output Power Measured in 50 ohm -6 0 4 dBm
RX Sensitivity - -83 -70 dBm
Input Low Voltage
/RESET, PIOX, PCM_IN, PCM_CLK,
PCM_SYNC, UART_RX, UART_CTS
-0.3 0.8 V
Input High Voltage
/RESET, PIOX, PCM_IN, PCM_CLK,
PCM_SYNC, UART_RX, UART_CTS
0.7 x VDD VDD +0.3 V
Output Low Voltage
PIOX, PCM_OUT, PCM_CLK,
PCM_SYNC, UART_TX, UART_RTS
-0.4V
Output High Voltage
PIOX, PCM_OUT, PCM_CLK,
PCM_SYNC, UART_TX, UART_RTS
VDD -0.4 - V
Average Current Consumption Receive DM1 40 - mA
