Rev 2.0, May 12, 2008 Page 6 of 12
DC Electrical Specifications: Unless otherwise stated VDD=3.3V+/-10% and both C and I Grades
Switching Specifications: Unless otherwise stated VDD=3.3V+/-10% and both C and I Grades
CLKIN, S2 and S1 Pins, 0 < VIN < 0.8V
CLKIN, S2 and S1 Pins, VIN = VDD
IOL = 8 mA (standard drive)
IOH = –8 mA (standard drive)
IOH = –12 mA (high drive)
Power Down Supply Current
CLKIN=0 to VDD or floating (input
will be pulled-down by 250kΩ
weak pull-down on-chip resistor)
All Outputs CL=0, 33MHz CLKIN
All Outputs CL=0, 66MHz CLKIN
All Outputs CL=0, 100MHz CLKIN
All Outputs CL=0, 133MHz CLKIN
Pull-up and Pull-down Resistors
Pins-1/2/3/6/7/8/9/10/11/14/15/16
(Input=Output )
All Active PLL Modes
High drive (-1H). All outputs CL=15pF
High drive (-1H), All outputs CL=30pF
Standard drive, (-1), All outputs CL=15pf
Standard drive, (-1), All outputs CL=30pf
(Input=Output )
PLL Bypass Mode
(S2=1 and S1=0)
High drive (-1H). All outputs CL=15pF
High drive (-1H), All outputs CL=30pF
Standard drive, (-1), All outputs CL=15pf
Standard drive, (-1), All outputs CL=30pf
Measured at 1.4V, Fout=66MHz, CL=15pF
Measured at 1.4V, Fout=66MHz, CL=15pF
Measured at 1.4V, Fout=66MHz, CL=15pF
Not Recommended
for New Designs