Evaluation Board User Guide
UG-083
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Te l: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluation Board for Single, High Speed Operational Amplifiers
(8-Lead, 3 mm × 3 mm LFCSP with Dedicated Feedback Pin)
See the last page for an important warning and disclaimers. Rev. 0 | Page 1 of 4
FEATURES
Enables quick breadboarding/prototyping
User-defined circuit configuration
Edge-mounted SMA connector provisions
Easy connection to test equipment and other circuits
GENERAL DESCRIPTION
The EB-O8CP33-1Z is designed to aid in the evaluation of
single, high speed operational amplifiers. The EB-O8CP33-1Z
is a bare board (that is, there are no components soldered to
the board) that enables users to quickly prototype a variety of
operational amplifier circuits, which minimizes risk and
reduces time to market. The EB-O8CP33-1Z evaluation
board supports any of the Analog Devices, Inc., single, high
speed operational amplifiers in 8-pin, 3 mm × 3 mm lead frame
chip scale packages (LFCSP) with a dedicated feedback pin.
Figure 1 shows the component side and circuit side of the
evaluation board. Figure 2 shows the evaluation board
schematic.
The 4-layer evaluation board accepts edge-mounted SMA con-
nectors on both inputs and outputs, which allows efficient and
quick connection to test equipment or other circuitry.
The board ground plane, component placement, and power
supply bypassing have been optimized for maximum circuit
flexibility and performance. The evaluation board uses a variety
of SMT component case sizes: 0402, 0508, 0603, and 7343.
Figure 3 and Figure 5 show the evaluation board assembly
drawings. The metal layout pattern for connecting the board to
the op amp and to the supporting circuitry is shown in Figure 4
and Figure 6.
DIGITAL PICTURE OF EVALUATION BOARD
08780-001
COMPONENT SIDE CIRCUIT SIDE
Figure 1. EB-O8CP33-1Z Component and Circuit Side of PCB
