OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MP62341DH-1-LF-Z

P1-P3P4-P6P7-P9P10-P12
MP62340-1/MP62341-1
3.3V/5V, Dual-Channel 1A
Current-Limited Power Distribution Switches
with Output Discharge
MP62340-1/MP62341-1 Rev.0.9 www.MonolithicPower.com 1
11/2/2009 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
The Future of Analog IC Technology
DESCRIPTION
The MP62340-1/MP62341-1 Power Distribution
Switch features internal current limiting to
prevent damage to host devices due to faulty
load conditions. The MP62340-1/MP62341-1
analog switch has 85m on-resistance and
operates from 2.7V to 5.5V input. It is available
with guaranteed current limits, making it ideal
for load switching applications. The MP62340-
1/MP62341-1 has built-in protection for both
over current and increased thermal stress. For
over current, the device will limit the current by
changing to a constant current mode.
As the temperature increases as a result of
short circuit, then the device will shut off. The
device will recover once the device temperature
reduces to approx 120°C.
The MP62340-1/MP62341-1 involves discharge
function that provides a resistive discharge path
for the external output capacitor when the part
is disabled.
The MP62340-1/MP62341-1 is available in 8-
pin MSOP package with exposed pad and
SOIC package without exposed pad.
FEATURES
• 1A Continuous Current
• Accurate Current Limit
• Output Discharge Function
• 2.7V to 5.5V Supply Range
• 140
µA Quiescent Current
• 85m MOSFET
• Thermal-Shutdown Protection
• Under-Voltage Lockout
• 8ms FLAG Deglitch Time
• No FLAG Glitch During Power Up
• Reverse Current Blocking
• Active High & Active Low Options
APPLICATIONS
• PDAs
• Portable GPS
• Notebook PC
• Set-top-box
• Telecom and Network Systems
• PC Card Hot Swap
• USB Power Distribution
“MPS” and “The Future of Analog IC Technology” are Trademarks of Monolithic
Power Systems, Inc.
TYPICAL APPLICATION
OUT2
MP62340-1/
MP62341-1
OUT1
1
2
3
4
5
6
7
8
+5V
To USB Controller
Output 1
Output 2
FLAG1
FLAG2
EN1*
IN
GND
EN2*
* EN is active high for MP62341-1
MP62340-1/MP62341-1 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHES
MP62340-1/MP62341-1 Rev.0.9 www.MonolithicPower.com 2
11/2/2009 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
ORDERING INFORMATION
Part Number Enable Switch
Maximum
Continuous
Load Current
Typical Short-
Circuit Current
@ T
A
=25C
Package
Top
Marking
Temperature
MP62340DS-1 SOIC8 62340DS-1
MP62340DH-1
Active
Low
MSOP8E 62340DH-1
MP62341DS-1 SOIC8 62341DS-1
MP62341DH-1
Active
High
Dual 1A 1.5A
MSOP8E 62341DH-1
–40°C to +85°C
* For Tape & Reel, add suffix –Z (e.g. MP62340DS-1–Z).For RoHS compliant packaging, add suffix –LF (e.g.
MP62340DS-1 -LF–Z)
PACKAGE REFERENCE
GND
IN
EN1*
EN2*
FLAG1
OUT1
OUT2
FLAG2
1
2
3
4
8
7
6
5
TOP VIEW
SOIC8
1
2
3
4
8
7
6
5
TOP VIEW
GND
IN
EN1*
EN2*
FLAG1
OUT1
OUT2
FLAG2
EXPOSED PAD
ON BACKSIDE
CONNECT TO GND
MSOP8E
MP62340-1/MP62341-1
Dual-Channel
(* EN is active high for MP62341-1)
ABSOLUTE MAXIMUM RATINGS
(1)
IN .................................................-0.3V to +6.0V
EN, FLAG, OUT to GND ..............-0.3V to +6.0V
Continuous Power Dissipation (TA = +25°C)
(2)
MSOP8E.................................................... 2.3W
SOIC8..................................................... 1.4W
Junction Temperature...............................150°C
Lead Temperature ....................................260°C
Storage Temperature...............
–65°C to +150°C
Operating Temperature..............
–40°C to +85°C
Thermal Resistance
(3)
θ
JA
θ
JC
SOIC8..................................... 90 ...... 42... °C/W
MSOP8E................................. 55 ...... 12... °C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function o
f
themaximum junction temperature T
J
(MAX), the junction-
toambient thermal resistance
JA,
and the ambient
temperature T
A.
The maximum allowable continuous powe
r
dissipation at any ambient temperature is calculated by PD
(MAX) = (T
J
(MAX) - T
A
)/
JA
. Exceeding the maximum
allowable power dissipation will cause excessive die
temperature, and the regulator will go into thermal shutdown.
Internal thermal shutdown circuitry protects the device from
permanent damage.
3) Measured on JESD51-7， 4-layer PCB.
MP62340-1/MP62341-1 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHES
MP62340-1/MP62341-1 Rev.0.9 www.MonolithicPower.com 3
11/2/2009 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
ELECTRICAL CHARACTERISTICS
(4)
V
IN
=5V, T
A
=+25°C, unless otherwise noted.
Parameter
Condition Min Typ Max Units
IN Voltage Range
2.7 5.5 V
Supply Current
One Channel Enabled, I
OUT
=0, One
Switch ON
90 120 µA
Supply Current
Both Channels Enabled, I
OUT
=0, Both
Switches ON
140 160 µA
Shutdown Current
Device Disable, V
OUT
=float, V
IN
=5.5V 1 µA
Off Switch Leakage
Device Disable, V
IN
=5.5V 1 µA
Current Limit
1.1 1.5 2.2 A
Trip Current
Current Ramp (slew rate100A/s) on
Output
1.7 2.4 A
Under-voltage Lockout
Rising Edge 1.95 2.65 V
Under-voltage Hysteresis
250 mV
FET On Resistance
I
OUT
=100mA (-40°CT
A
+85°C) 85 130 m
EN Input Logic High Voltage
2 V
EN Input Logic Low Voltage
0.8 V
FLAG Output Logic Low Voltage
I
SINK
=5mA 0.4 V
FLAG Output High Leakage
Current
V
IN
=V
FLAG
=5.5V 1 µA
Thermal Shutdown
140 °C
Thermal Shutdown Hysteresis
20 °C
V
IN
=5.5V, C
L
=1µF, R
L
=5.5 0.9 ms
V
OUT
Rising Time, Tr
(5)
V
IN
=2.7V, C
L
=1µF, R
L
=5.5 1.7 ms
V
IN
=5.5V, C
L
=1µF, R
L
=5.5 0.5 ms
V
OUT
Falling Time, Tf
(6)
V
IN
=2.7V, C
L
=1µF, R
L
=5.5 0.5 ms
Turn On Time, Ton
(7)
C
L
=100µF, RL=5.5 3 ms
Turn Off Time, Toff
(8)
C
L
=100µF, RL=5.5 10 ms
Discharge Resistance 100
FLAG Deglitch Time
4 8 15 ms
EN Input Leakage
1
µA
Reverse Leakage Current
V
OUT
=5.5V, V
IN
=GND 0.2 µA
Notes:
4) Production test at +25°C. Specifications over the temperature range are guaranteed by design and characterization.
5) Measured from 10% to 90% output signal.
6) Measured from 90% to 10% output signal.
7) Measured from 50% EN signal to 90% output signal.
8) Measured from 50% EN signal to 10% output signal.
P1-P3P4-P6P7-P9P10-P12

MP62341DH-1-LF-Z

Mfr. #:
Buy MP62341DH-1-LF-Z
Manufacturer:
Monolithic Power Systems (MPS)
Description:
Power Switch ICs - Power Distribution 3.3/5V 2-Ch 1A Current Limit Switch
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet