OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ATTINY10-TSHR

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P17
5.2. 8MA4
Figure 5-2. 8MA4
TITLE
DRAWING NO.GPC
REV.
Packag e Drawing Co ntac t:
pa cka ge drawings @a tme l.com
8MA4YAG A
8PAD, 2x2x0.6 mm bo dy, 0.5 mm pitch,
0.9x1.5 mm e xpos e d pad, S aw s ing ulated
Thermally enhanc e d plas tic ultra thin dual flat
no lead packag e (UDFN/US ON)
12/17/09
COMMON DIMENS IONS
(Unit of Mea s ure = mm)
SYMBOL
MIN
NOM
MAX
NOTE
A – – 0.60
A1 0.00 – 0.05
b 0.20 – 0.30
D 1.95 2.00 2.05
D2 1.40 1.50 1.60
E 1.95 2.00 2.05
E2 0.80 0.90 1.00
e – 0.50 –
L 0.20 0.30 0.40
K 0.20 – –
TOP VIEW
BOTTOM VIEW
Note :
1. ALL DIMENS IONS ARE IN mm. ANGLES IN DEGREES .
2. C OPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE
TERMINALS COPLANARITY SHALL NOT EXCEED 0.05 mm.
3. WARPAGE SHALL NOT EXCEED 0.05 mm.
4. REFER JEDEC MO-236/MO-252
Pin 1 ID
E
D
D2
1 2 3 4
8 7 6 5
E2
b
14
8
5
e
K
L
0.05
SIDE VIEW
A1
A
c
c
0.05 c
8x
C0.2
Atmel ATtiny4 / ATtiny5 / ATtiny9 / ATiny10 [DATASHEET]
Atmel-8127H-ATiny4/ ATiny5 /ATiny9/ ATiny10_Datasheet_Summary-11/2016
13
6. Errata
6.1. ATtiny4
6.1.1. Rev. E
• Programming Lock Bits
1. Programming Lock Bits
Programming Lock Bits to a lock mode equal or lower than the current causes one word of Flash to be
corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
6.1.2. Rev. D
• ESD HBM (ESD STM 5.1) level ±1000V
• Programming Lock Bits
1. ESD HBM (ESD STM 5.1) level ±1000V
The device meets ESD HBM (ESD STM 5.1) level ±1000V.
Problem Fix / Workaround
Always use proper ESD protection measures (Class 1C) when handling integrated circuits before and
during assembly.
2. Programming Lock Bits
Programming Lock Bits to a lock mode equal or lower than the current causes one word of Flash to be
corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
6.1.3. Rev. A – C
Not sampled.
6.2. ATtiny5
6.2.1. Rev. E
• Programming Lock Bits
1. Programming Lock Bits
Programming Lock Bits to a lock mode equal or lower than the current causes one word of Flash to be
corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
Atmel ATtiny4 / ATtiny5 / ATtiny9 / ATiny10 [DATASHEET]
Atmel-8127H-ATiny4/ ATiny5 /ATiny9/ ATiny10_Datasheet_Summary-11/2016
14
6.2.2. Rev. D
• ESD HBM (ESD STM 5.1) level ±1000V
• Programming Lock Bits
1. ESD HBM (ESD STM 5.1) level ±1000V
The device meets ESD HBM (ESD STM 5.1) level ±1000V.
Problem Fix / Workaround
Always use proper ESD protection measures (Class 1C) when handling integrated circuits before and
during assembly.
2. Programming Lock Bits
Programming Lock Bits to a lock mode equal or lower than the current causes one word of Flash to be
corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
6.2.3. Rev. A – C
Not sampled.
6.3. ATtiny9
6.3.1. Rev. E
• Programming Lock Bits
1. Programming Lock Bits
Programming Lock Bits to a lock mode equal or lower than the current causes one word of Flash to be
corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
6.3.2. Rev. D
• ESD HBM (ESD STM 5.1) level ±1000V
• Programming Lock Bits
1. ESD HBM (ESD STM 5.1) level ±1000V
The device meets ESD HBM (ESD STM 5.1) level ±1000V.
Problem Fix / Workaround
Always use proper ESD protection measures (Class 1C) when handling integrated circuits before and
during assembly.
2. Programming Lock Bits
Programming Lock Bits to a lock mode equal or lower than the current causes one word of Flash to be
corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
Atmel ATtiny4 / ATtiny5 / ATtiny9 / ATiny10 [DATASHEET]
Atmel-8127H-ATiny4/ ATiny5 /ATiny9/ ATiny10_Datasheet_Summary-11/2016
15
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P17

ATTINY10-TSHR

Mfr. #:
Buy ATTINY10-TSHR
Manufacturer:
Microchip Technology / Atmel
Description:
8-bit Microcontrollers - MCU 12MHz, Indust. Temp
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet