-DESCRIPTION
It took awhile to perfect-but that's okaysince we can now safely say that the
Adafruit case for Raspberry Pi Model B+ / Pi 2 is The SingleGreatest Raspberry Pi
Model B+ Case Ever.
This enclosurewas designed by Mike Doell - just like our elegant, beautiful, and
functional Pi Case for Raspberry Pi Model B. Made of ultra-durable, super-glossy
polycarbonate, it is both good looking and tough enough to toss into your bookbag
or toolbox. It has slim openingsfor all your cables, an easy-to-remove beveled slot
for your Micro SD card,slots for both your Pi Camera and upcoming Display, and a
space for your GPIO cable to extend out from the Pi.
The Pi snaps into the base and the lid fits snugly onto the top. If you want to break
out your Pi you can use your case without the lid and add hats to your B+ with
ease.
This is the basic, classic enclosure with a smoke base and a clear top. More colors
are coming soon and we'll have packs to mix and match for ultimate Raspberry Pi
B+ enclosure fun, but we'll be starting out with this very neutral gray/clear combo.
This case works for the Raspberry Pi Model B+ / Pi 2only. It does not work for the
Raspberry Pi Model A or B. It does work with the model A+ but there will be a bit
of empty space of course, and you'll need to snake your USB cable or connector
through the front holes which may not work if the cable is bulky
No Pi, cables, or Pi Camera included. This product is just the case!
Page 2 of 2
7
24
201
htt
://www.adafruit.com/
roducts/2258
