●
Precautions
Hirose Electric did not check the compatibility with the PHY chip. When replacing other manufacturers jacks it is
recommended to verify the compatibility with the actual equipment.
This connector is mounted on the board using wave or manual soldering.Do not use reflow soldering.
Recommended board thickness: 1.6mm
IPA cleaning at room temperature is recommended for the cleaning of this product.
When an aqueous cleaning agent is to be used, there is a concern that the light pipe (made of polycarbonate resin) may
change color; therefore, please make a selection based on a table showing the effects on the resin.These tables are
issued by the various manufacturers of cleaning agents.
1
2
3
4
BRecommended PCB mounting pattern
BPulse Transformer Circuit Diagram
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
