OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TM11RD-5TANA-A-88

P1-P3P4-P5
1
RJ45 Modular Jack Connectors with Pulse Transformers
TM11RD - 5TANA Series
2006.8
1 TX+
2 TX-
3 RX+
4
5
6 RX-
7
8
TD+ 1
Insulated transformer
Circuit
Choke coil
TX- 2
CT 3
RD+ 7
CT 6
RD- 8
4
GRAND 5
RJ45
PCB
Incorrect Plug Insertion Prevention Key
Outline of mating plug
■Features
1. Pulse Transformers Support FastEthernet
Equipped with built-in insulation transformers and
common mode choke coils, withstanding voltage of 1.5
kV and supporting 100Base-Tx and 10Base-T.
2. Incorrect Plug Insertion Prevention Key
A built-in key offers protection against insertion of 6-
conductor type modular plug.
3. Built-in optical indicators
Optical indicators are integral part of the connectors,
saving space on the board.
There is no emission of any electrical noise.
4. EMI protection
Metal shield covers the outer surfaces of the connectors
assuring complete protection against electromagnetic
interference.
5. FCC standards
Meets requirements of FCC Title 47, Part 68, Subpart F.
6. Environmental considerations
Plating compounds are lead-free.
■Applications
Notebook PC's, telecommunication hubs, routers, bridges
and ATM transmission equipment, Ethernet switches and
networking equipment, office equipment, test and
measurement equipment.
Light pipe
Pulse Transformer Circuit Diagram
RJ11 (6 position) plug insertion prevention
Built-in optical indicators
* Light colors are determined by the color of LED's used.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
2
TM11 R D - 5 T A NA - A - 8 8 - LP
■Materials
Component Material Finish/Color Remarks
Insulator
Contacts
Shield
Incorrect insertion prevention key
Pulse transformer
Optical pipe
PBT
Copper alloy
Copper alloy
Stainless
----------
Polycarbonate
Black
Tin plated
----------
Clear
UL94V-0
UL94V--0
1 to 65MHz
100V DC
Basic terminal between 123-45-768 500V AC / one minute
Primary (RJ45 side) to secondary (PCB side)
1500V AC / one minute
Terminal to shield
1500V AC / one minute
1 to 65MHz
1 to 10 MHz
10 to 30 MHz
30 to 60 MHz
60 to 80 MHz
0.1V
,
100KHz
,
8mADC
1 to 30 MHz
30 to 60 MHz
60 to 100 MHz
1 to 50 MHz
50 to 150 MHz
-2dB min.
100M ohms min.
No flashover or insulation breakdown.
-1dB min.
-20 dB max.
-16 dB max.
-12 dB max.
-10 dB max.
350µH min.
-40 dB max.
-35 dB max.
-30 dB max.
-30 dB max.
-20 dB max.
1.Insertion resistance
2.Insulation resistance
3.Withstanding voltage
4.Insertion resistance
5.Return loss
6.Inductance
7.Cross talk
(Reference)
8.
Common mode rejection ratio
(Reference)
Connector
Pulse transformer
Ratings
Voltage rating 125V AC
Operating temperature range: -25ç
to +80ç (Note)
■Product Specifications
Item Specification Conditions
Note: Includes temperature rise caused by current flow.
Contact area : Gold plated
Termination area: Tin plated
■Ordering information
1 2 3 6 7
10
4 8 95
Series name : TM11
Connector type R: Jack
Direction of locking lever D: Down
(mating plug)
Jack suffix number : 5
Transformer T: With transformer
Transformer type A: Transformer circuit type
Incorrect insertion prevention key
NA-A: With built-in key
Jack opening code 8: 8 contacts
Number of inserted contacts
8: 8 contacts
Optical pipe
LP: With optical pipe inserted
Blank: Without optical pipe
1
2
3
4
5
6
7
8
10
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
3
■Modular Jack Connectors (With built-in optical pipe)
1 1
3
22
73
6
86
4
4
5
7
58
1CT:1CT
1CT:1CT
0.001µF
75ø
75ø
75ø75ø
CHS GROUND
Cable side
Board side
RX+
RX-
TX+
TX-
TD+
CT
TD-
RD+
CT
RD-
1
3
5
7
2
4
68
8.89
1.27
6.2
2.54
3.05
Ø3.25
Ø1.63
8-
Ø0.9
15.75
7.4
10.75MAX
5.55MIN
Printed board edge
No conductive traces
11.43
20.75MIN
11.6
LED center position
12.7
CL No. RoHSPart Number
CL222-2936-3 YESTM11RD-5TANA-A-88-LP
●
Precautions
Hirose Electric did not check the compatibility with the PHY chip. When replacing other manufacturers jack it is recommended to verify the
compatibility with the actual equipment.
This connector is mounted on the board using wave or manual soldering. Do not use reflow soldering.
Recommended board thickness: 1.6mm
To assure correct operation of the indicator light pipes LED's must be installed directly on the PCB, within recommended dimensions and with light emitting
center in upward direction.
Mount the LED so that the center of the light emitting center aligns with the center point as dimensioned on the Recommended PCB mounting pattern above.
Verify the actual LED's mounting pattern with it's manufacturer, then add it to the PCB mounting pattern, assuring the correct placement of the center point.
IPA cleaning at room temperature is recommended for the cleaning of this product.
When an aqueous cleaning agent is to be used, there is a concern that the light pipe (made of polycarbonate resin) may change color; therefore, please
make a selection based on a table showing the effects on the resin.These tables are issued by the various manufacturers of cleaning agents.
1
2
3
4
5
6
7
5
4
3.2MAX
2.7MAX
1.5MAX
LED light emitting center
BRecommended PCB mounting pattern
BPulse Transformer Circuit Diagram
3.56
3.18
10.8
21.3
0.3
Contact No.1 Contact No.8
17.5
15.75
16
13.6
Contact No.8
Contact No.1
0.48
1.6
24.2
Suggested dimensions of LEDs
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
P1-P3P4-P5

TM11RD-5TANA-A-88

Mfr. #:
Buy TM11RD-5TANA-A-88
Manufacturer:
Hirose Electric
Description:
Modular Connectors / Ethernet Connectors MOD JACK CAT5E 8 8 XFRMR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet