• Metal impregnated material allows identification by metal detectors
or x-ray inspection equipment to help meet food, beverage, and
pharmaceutical safety standards, to help reduce product
contamination, loss, and recall
• Nylon material for general purpose maintenance and repair
applications; ideal for use in control panels and overhead cable runs
• Polypropylene material provides excellent chemical resistance for
use in processing and packaging areas where aggressive acid and
alkaline chemicals are use to clean the equipment
• One-piece construction for consistent performance and reliability
• Lowest threading force of any one-piece cable tie in the industry
• Curved tip is easy to pick up from flat surfaces and allows faster
initial threading to speed installation
Part Number
Length Width Thickness
Max.
Bundle
Dia.
Min. Loop
Tensile
Strength
Recommended
Installation
Tool Material
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.In. mm In. mm In. mm In. mm Lbs. N
Nylon 6.6
Miniature Cross Section
PLT1M-C86 3.9 100 .098 2.5 .044 1.1 .87 22 18 80
GTS, GTSL,
GS2B, STS2
Nylon 6.6 100 1000
Intermediate Cross Section
PLT2I-C86 8.0 203 .135 3.4 .047 1.2 2.00 51 40 178
GTS, GTSL,
GS2B, STS2
Nylon 6.6 100 1000
Standard Cross Section
PLT2S-C86 7.3 186 .190 4.8 .057 1.4 1.85 47 50 222
GTS, GTSL,
GS2B, GTH,
GS4H,
STS2, STH2
Nylon 6.6 100 1000
PLT3S-C86 11.5 291 .190 4.8 .057 1.4 3.00 76 50 222 Nylon 6.6 100 1000
PLT4S-C86 14.4 366 .190 4.8 .057 1.4 4.00 102 50 222 Nylon 6.6 100 1000
Light-Heavy Cross Section (Straight Tip)
PLT3H-L86 11.1 282 .300 7.6 .075 1.9 3.00 76 120 120
GTH, GS4H,
GS4EH, STH2,
ST3EH
Nylon 6.6 50 500
PLT4H-L86 14.4 366 .300 7.6 .075 1.9 4.00 102 120 120 Nylon 6.6 50 500
Polypropylene
Miniature Cross Section
PLT1M-C186 3.9 100 0.098 2.5 0.044 1.1 0.87 22 15 67 GTS, GTSL,
GS2B, STS2
Polypropylene 100 1000
Intermediate Cross Section
PLT2I-C186 8.0 203 .135 3.4 .047 1.2 2.00 51 24 107 GTS, GTSL,
GS2B, STS2
Polypropylene 100 1000
Standard Cross Section
PLT2S-C186 7.3 186 .190 4.8 .057 1.4 1.85 47 30 133 GTS, GTSL,
GS2B, GTH,
GS4H,
STS2, STH2
Polypropylene 100 1000
PLT3S-C186 11.5 291 .190 4.8 .057 1.4 3.00 76 30 133 Polypropylene 100 1000
PLT4S-C186 14.4 366 .190 4.8 .057 1.4 4.00 102 30 133 Polypropylene 100 1000
Light-Heavy Cross Section (Straight Tip)
PLT3H-L186 11.1 282 .300 7.6 .075 1.9 3.00 76 60 267 GTH, GS4H,
GS4EH, STH2,
ST3EH
Polypropylene 50 500
PLT4H-L186 14.4 366 .300 7.6 .075 1.9 4.00 102 60 267 Polypropylene 50 500
Part Number Material
Used
with
Cable
Ties
A
Length
In.
(mm)
B
Width
In.
(mm)
C
Height
In.
(mm)
Counterbore
Diameter
In. (mm)
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Cable Tie Mounts
TM2S8-C86
Nylon 6.6
Min., Int.,
Std.
.630
(16.0)
.422
(10.7)
.275
(7.0)
.325 (8.3) #8 (M4) screw
100 500
TM3S8-C86
Std.,
Lt. Hvy.
.867
(22.0)
.614
(15.6)
.373
(9.5)
.325 (8.3)
#8 (M4) screw 100 500
TM3S10-C86 #10 (M5) screw 100 500
TM2S8-C186
Polypropylene
Min., Int.,
Std.
.630
(16.0)
.422
(10.7)
.275
(7.0)
.325 (8.3) #8 (M4) screw
100 500
TM3S8-C186
Std.,
Lt. Hvy.
.867
(22.0)
.614
(15.6)
.373
(9.5)
.325 (8.3)
#8 (M4) screw 100 500
TM3S10-C186 #10 (M5) screw 100 500