ACAS 0612 - Precision
www.vishay.com
Vishay Beyschlag
Revision: 12-Apr-13
1
Document Number: 28751
For technical questions, contact: thinfilmarray@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Precision Thin Film Chip Resistor Array
The ACAS 0612 thin film chip resistor arrays combine the
proven reliability of precision thin film chip resistor products
with the advantages of chip resistor arrays. Defined relative
tolerance (matching) and relative TCR (tracking) make this
product perfectly suited for applications with outstanding
requirements towards stable fixed resistor ratios. A small
package enables the design of high density circuits in
combination with reduction of assembly costs. The ACAS is
available with equal or different resistor values.
FEATURES
• Advanced thin film technology
• Two pairs or four equal resistor values
• Relative TCR down to ± 5 ppm/K (tracking)
• Relative tolerance down to ± 0.05 % (matching)
• Pure Sn termination on Ni barrier layer
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Precision analogue circuits
• Voltage divider
• Feedback circuits
• Signal conditioning
Notes
• The relative figures of tolerance, TCR and drift are related to a medial axis between the maximum and minimum permissable deviation of
the resistor array. For detailed information please refer to the application note: Increasing Accuracy in Feedback Circuits and Voltage
Dividers with Thin Film Chip Resistor Arrays (www.vishay.com/doc?28194
).
(1)
Resistance values to be selected from E24; E192.
(2)
For higher max. film temperature and AEC-Q200 qualification please refer to data sheet ACAS 0606 AT, ACAS 0612 AT - Precision available
on our web site at www.vishay.com/doc?28770
.
TECHNICAL SPECIFICATIONS
DESCRIPTION ACAS 0612
EIA size 0612
Metric size RR1632M
Configuration, isolated 4 x 0603
Design:
All equal AE
Two pairs TP
Resistance values 47 to 221 k
(1)
Absolute tolerance ± 0.1 %
Relative tolerance ± 0.05 %
Absolute temperature coefficient ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K
Relative temperature coefficient ± 15 ppm/K; ± 10 ppm/K; ± 5 ppm/K
Max. resistance ratio R
min.
/R
max.
1:5
Rated dissipation: P
70
Element 0.1 W
Package, 4 x 0603 0.3 W
Operating voltage 75 V
Operating temperature range - 55 °C to 125 °C
Permissible film temperature 125 °C
(2)
Insulation voltage (U
ins
) against ambient and between
isolated resistors, continuous
75 V