EM357-MOD-ANT-C Datasheet EM357-MOD-ANT-C, EM357-MOD-LR-RF-C, EM357-MOD-LR-ANT-T | P1-P3

TS8

EMBER

EM3X MODULE TECHNICAL SPECIFICATION

Silicon Labs’ EM3x development kits contain various modules designed around the EM3x family of ICs. All of these

modules are designed and sold by Silicon Labs’ module partners Telegesis (UK) Limited and California Eastern

Laboratories (CEL). The module designs allow them to be integrated into any product without the need for RF

experience and expertise. Utilizing stacks such as Silicon Labs’ certified ZigBee network stack EmberZNet, these

modules enable a developer to add powerful wireless networking capability to products and quickly bring them to

market.

This document provides the technical specification of the EM3x modules on its Silicon Labs-specific carrier board.

For more information on the other Telegesis modules, contact Telegesis, Ltd directly at www.telegesis.com

. For

more information on other CEL modules, contact CEL directly at meshconnect.cel.com.

New in This Revision

Added CEL CE compliance information.

Contents

EM3x Module Definitions ................................................................................................................................. 2

2 EM3x Module Features ................................................................................................................................... 3

3 Performance Characteristics ........................................................................................................................... 3

4 EM3x Configurations ....................................................................................................................................... 5

5 Mechanical Details .......................................................................................................................................... 7

5.1 EM3x Module Interface Connector ........................................................................................................... 8

TS8

2 Rev. 1.4

1 EM3x Module Definitions

To accommodate the requirements of the different markets, Telegesis and CEL have developed a series of pin-

compatible modules based on the Ember EM341, EM346, EM357, and EM3588 chipsets. Table 1 defines the

Telegesis, CEL, and Silicon Labs part numbers for each module as well as describes the differences (Power

Amplifier (PA), Low Noise Amplifier (LNA), and RF connection) between each module.

Table 1. Silicon Labs and Module Partner Part Numbers

Silicon Labs

P/N

Silicon Labs Orderable

Part Number (OPN)

EM3x

Module

Partner

Module Partner P/N

(Module only)

RF Connection

PA /

LNA?

(Long

Range)

110-0740-000 EM341-MOD-ANT-C EM341 CEL ZICM341SP0-1 Antenna No

110-0741-000 EM341-MOD-RF-C EM341 CEL ZICM341SP0-1C Connector No

110-0742-000 EM346-MOD-ANT-C EM346 CEL ZICM346SP0-1 Antenna No

110-0743-000 EM346-MOD-RF-C EM346 CEL ZICM346SP0-1C Connector No

110-0720-000 EM357-MOD-ANT-T EM357 Telegesis ETRX357 SMT Antenna No

110-0721-000

EM357-MOD-RF-T

EM357

Telegesis

ETRX357HR

Mini-RF Connector

110-0722-000 EM357-MOD-LR-RF-T EM357 Telegesis ETRX357HR-LRS Mini-RF Connector Yes

110-0723-000 EM357-MOD-LR-ANT-T EM357 Telegesis ETRX357-LRS SMT Antenna Yes

110-0730-000 EM357-MOD-ANT-C EM357 CEL ZICM357SP0-1 SMT Antenna No

110-0731-000 EM357-MOD-RF-C EM357 CEL ZICM357SP0-1C Mini-RF Connector No

110-0732-000 EM357-MOD-LR-RF-C EM357 CEL ZICM357SP2-1C Mini-RF Connector Yes

110-0733-000 EM357-MOD-LR-ANT-C EM357 CEL ZICM357SP2-1 SMT Antenna Yes

110-0734-000 EM3588-M-AN-C EM3588 CEL ZICM3588SP0-1 SMT Antenna No

110-0735-000 EM3588-MOD-RF-C EM3588 CEL ZICM3588SP0-1C Mini-RF Connector No

110-0736-000 EM3588-MLR-RF-C EM3588 CEL ZICM3588SP2-1C Mini-RF Connector Yes

110-0737-000 EM3588-MLR-AN-C EM3588 CEL ZICM3588SP2-1 SMT Antenna Yes

All of these modules are available from Telegesis and CEL. Silicon Labs provides the CEL EM357 and EM3588

module types with the EM35x Development Kit (part number EM35X-DEV) and the EM341 and EM346 modules

with the EM34x Development Kit (part number EM34X-DEV).

For modules whose RF connection is a mini-RF connector, an RF adapter cable (Tyco/Amp part number 2032440-

1) can be used to interface the module to external test equipment. One of these RF adapter cables is included with

the development kits.

To connect to the EM35x breakout board (Silicon Labs P/N: 130-0680-000), each module shown in Table 1 is

soldered to a small carrier board. The carrier board connector is discussed in section 5.1, EM3x Module Interface

Connector.

TS8

Rev. 1.4 3

2 EM3x Module Features

Module features:

• Small form factor, SMT module (25 mm x 19 mm)

• Side castellation for easy soldering and inspection

• Industry standard JTAG Programming and real-time network level debugging via the Packet Trace Port.

• Wide supply voltage range (2.1 to 3.6 V)

• Low sleep current (< 1 µA for EM35x and EM34x, < 2 µA for EM3588)

• Access to all EM3x GPIO from the System-on-Chip (SoC)

• Access to either a U.FL RF Connector or a SMT antenna allows flexibility in antenna selection process

• FCC compliance

Telegesis:

FCC ID: S4GEM35XA

CEL:

FCC ID: W7Z-ZICM357SPO

FCC ID: W7Z-ZICM357SP2

• CE compliance

Telegesis:

Radio: EN300 328 v1.7.1

EMC: EN301 489-17 v2.1.1

Safety: EN60950-1

CEL

Radio: EN 300 328 V1.8.1 (2006 ‐ 2012)

EMC: EN 301 489‐1 V1.8.1, V1.9.1

EN 301 489‐17 V2.2.1

• Long Range versions with a link budget of up to 124 dB

Module with carrier board features:

• Access to the Packet Trace Port connector (allows for direct connection to the Ember Debug Adapter

(ISA3) for programming and debugging)

• Two debug LEDs

• Access to all EM3x GPIO through a robust 0.05” pitch connector

3 Performance Characteristics

This section describes the characteristics of the module with carrier board. For more information on the EM35x and

EM34x SoC performance, refer to the EM35x, EM358x, EM341 and EM346 data sheets.

Unless specified, the data within each of the tables was gathered at room temperature (25 °C) and 3.0 V source

potential. Table 2 summarizes the recommended operating conditions for the modules.

Table 2. Recommended Operating Conditions for the EM3x Module

Parameter Min Typ Max Unit

VDD supply 2.1 — 3.6 V

RF Input Frequency 2405 — 2480 MHz

RF Input Power (at RF Port)

—

dBm

Operating Temperature Range -40 — 85 °C

P1-P3 P4-P6 P7-P9 P10-P11

EM357-MOD-ANT-C

Mfr. #:

Buy EM357-MOD-ANT-C

Manufacturer:

Silicon Labs

Description:

Zigbee Modules (802.15.4) EM357 module for development/test use.

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

EM357-MOD-ANT-C

EM357-MOD-ANT-C

Products related to this Datasheet