ACPL-M43U-000E Datasheet ACPL-M43U-000E, ACPL-M43U-500E | P1-P3

ACPL-M43U-000E

Wide Operating Temperature 1MBd Digital Optocoupler

with R

Coupler™ Isolation

Data Sheet

CAUTION: It is advised that normal static precautions be taken in handling and assembly

of this component to prevent damage and/or degradation which may be induced by ESD.

Lead (Pb) Free

RoHS 6 fully

compliant

RoHS 6 fully compliant options available;

-xxxE denotes a lead-free product

Description

The ACPL-M43U is a single channel, high temperature,

high CMR, high speed digital optocoupler in a ve lead

miniature footprint specically used for industrial applica-

tions. The SO-5 JEDEC registered (MO-155) package out-

line does not require “through holes” in a PCB. This pack-

age occupies approximately one-fourth the footprint area

of the standard dual-in-line package. The lead prole is

designed to be compatible with standard surface mount

processes.

This digital optocoupler uses an insulating layer between

the light emitting diode and an integrated photon detec-

tor to provide electrical insulation between input and

output. Separate connections for the photodiode bias

and output transistor collector increase the speed up to a

hundred times over that of a conventional photo-transis-

tor coupler by reducing the base-collector capacitance.

The ACPL-M43U has an increased common mode tran-

sient immunity of 30kV/µs minimum at V

= 1500V over

extended temperature range.

Avago R

Coupler isolation products provide the reinforced

insulation and reliability needed for critical in auto¬motive

and high temperature industrial applications.

Functional Diagram

Features

• High Temperature and Reliability IPM Driver for

Industrial Applications.

• 30 kV/μs High Common-Mode Rejection at V

= 1500

V (typ)

• Compact, Auto-Insertable SO5 Packages

• Wide Temperature Range: -40°C ~ 125°C

• High Speed: 1MBd (Typ)

• Low LED Drive Current: 10mA (typ)

• Low Propagation Delay: 300ns (typ)

• Worldwide Safety Approval:

- UL1577 recognized, 3750Vrms/1min

- CSA Approved

- IEC/EN/DIN EN 60747-5-5 Approved

Applications

• Industrial Intelligent Power Module isolation for motor

controls

• Isolated IGBT/MOSFET gate drive

• AC and brushless dc motor drives

• Industrial inverters for power supplies

Truth Table

LED Vo

LOW

OFF

HIGH

The connection of a 0.1 μF bypass capacitor between pins 4 and 6 is

recommended.

OUT

GNDCATHODE

ANODE

Ordering Information

Part Number

Options

Package

Surface

Mount

Tape

& Reel

IEC/EN/DIN

EN 60747-5-5 QuantityRoHS Compliant

ACPL-M43U -000E

SO-5

X X 100 per tube

ACPL-M43U -500E X X X 1500 per reel

To order, choose a part number from the part number column and combine with the desired option from the option

column to form an order entry.

Example 1:

ACPL-M43U-500E to order product of Mini-at Surface Mount 5-pin package in Tape and Reel packaging with

RoHS compliant.

Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.

Package Outline Drawings

ACPL-M43U Small Outline SO-5 Package (JEDEC MO-155)

M43U

YWW

7.0 ± 0.2

(0.276 ± 0.008)

2.5 ± 0.1

(0.098 ± 0.004)

0.102 ± 0.102

(0.004 ± 0.004)

4.4 ± 0.1

(0.173 ± 0.004)

1.27

(0.050)

BSC

0.216 ± 0.038

(0.0085 ± 0.0015)

0.71

(0.028)

MIN.

0.4 ± 0.05

(0.016 ± 0.002)

3.6 ± 0.1*

(0.142 ± 0.004)

DIMENSIONS IN MILLIMETERS (INCHES)

* MAXIMUM MOLD FLASH ON EACH SIDE IS 0.15 mm (0.006)

NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.

7 MAX.

MAX. LEAD COPLANARITY

= 0.102 (0.004)

8.27

(0.325)

2.0

(0.080)

2.5

(0.10)

1.3

(0.05)

0.64

(0.025)

4.4

(0.17)

LAND PATTERN RECOMMENDATION

IEC/EN/DIN EN 60747-5-5 Insulation Characteristics*

Description Symbol Characteristic Unit

Installation classication per DIN VDE 0110/1.89, Table 1

for rated mains voltage ≤ 150 Vrms

for rated mains voltage ≤ 300 Vrms

for rated mains voltage ≤ 600 Vrms

I – IV

I – III

I – II

Climatic Classication 55/125/21

Pollution Degree (DIN VDE 0110/1.89) 2

Maximum Working Insulation Voltage V

IORM

567 V

peak

Input to Output Test Voltage, Method b*

IORM

x 1.875=V

, 100% Production Test with t

=1 sec,

Partial discharge < 5 pC

1063 V

peak

Input to Output Test Voltage, Method a*

IORM

x 1.6=V

, Type and Sample Test, t

=10 sec,

Partial discharge < 5 pC

907 V

peak

Highest Allowable Overvoltage (Transient Overvoltage t

ini

= 60 sec) V

IOTM

6000 V

peak

Safety-limiting values – maximum values allowed in the event of a

failure.

Case Temperature

Input Current

Output Power

Insulation Resistance at T

S, VIO

= 500 V

S, INPUT

S, OUTPUT

175

230

600

>10

°C

*Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section, (IEC/

EN/DIN EN 60747-5-5) for a detailed description of Method a and Method b partial discharge test proles.

Regulatory Information

The ACPL-M43U is approved by the following organizations:

Approved under UL 1577, component recognition pro-

gram up to V

ISO

= 3750 VRMS expected prior to product

release.

CSA

Approved under CSA Component Acceptance Notice #5.

IEC/EN/DIN EN 60747-5-5 Approved under:

IEC 60747-5-5:2007

EN 60747-5-5:2011

Recommended Reﬂow Soldering Proﬁle

Recommended reow soldering condition are per JEDEC Standard J-STD-020 (latest revision). Non-halide ux should

be used.

P1-P3 P4-P6 P7-P8

ACPL-M43U-000E

Mfr. #:

Buy ACPL-M43U-000E

Manufacturer:

Broadcom / Avago

Description:

High Speed Optocouplers 1MBd 30k V/us

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

ACPL-M43U-000E

ACPL-M43U-000E

Products related to this Datasheet