1
04-2017, Rev. 0417
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
Panel/Plug-in Relays
Power Relay RM C/D
n
1 pole 30/32 A, 1 form X, double make, NO or
1 form Z, double make + double break, NO + NC
n
Switching capacity up to 12800VA
n
DC or AC coil
n
Push-to-test button
n
Chassis mount
Typical applications
Battery chargers, heating control.
Approvals
UL E214025, VDE Cert. No. 40003144 for AgNi-versions
Technical data of approved types on request.
Contact Data RMC RMD
Contact arrangement 1 form Z, 1 form X,
1 NO + 1 NC 1 NO
Rated voltage 400VAC
Max. switching voltage 440VAC
Rated current 30A/32A (VDE)
Limiting making current, max. 20ms 60A
Switching power 7500VA
Contact material AgCdO, AgNi 90/10
Contact style single bridging contact
Min. recommended contact load 24VDC/100mA
Frequency of operation,
with/without load, DC coil 960/6000h
-1
Operate/release time max., DC coil 20/20ms
Bounce time max., form A/form B, DC coil 4/6ms
Contact ratings
Type Contact Load Cycles
EN 61810
RMC/D X of Z (NO), AgNi 32A, 400VAC res. 40°C 20x10³
RMC Y of Z (NC), AgNi 32A, 400VAC res. 40°C 10x10³
RMC/D X of Z (NO)
AgNi DC coil 30A, 400VAC res. 50°C 10x10³
RMC/D X of Z (NO)
AgNi AC coil 30A, 400VAC res. 40°C 10x10³
UL 508
RMC/D X/Y (NO/NC),
AgCdO, 30 A, 277 VAC, general purpose 50°C 10x10
3
RMC/D X/Y (NO/NC) 30 A, 415 VAC, resistive 50°C 10x10
3
RMC/D X (of Z / NO), AgNi 120 VAC, 0,75 HP 50°C 10x10
3
RMC/D X/Y (NO/NC) 240 VAC, 2 HP 50°C 6x10
3
Mechanical endurance
DC coil 10x10
6
operations
AC coil 10x10
6
operations
Coil Data
Coil voltage range 6 to 220 VDC
6 to 400 VAC
Operative range, IEC 61810 2
Coil insulation system according UL class 130 (B)
Coil versions, DC coil
Coil code Rated Coil Rated coil
STD LED PD
3)
LED+ voltage resistance power
bipolar PD
3)
VDC Ω±10%
1)2)
W
006 L06 0A6 LA6 6 32 1.1
012 L12 0B2 LB2 12 110 1.3
024 L24 0C4 LC4 24 475 1.2
048 L48 0E8 LE8 48 2000 1.2
060 L60 0G0 LG0 60 2850 1.3
110 M10 1B0 MB0 110 10000
1)
1.2
221 N21 2C1 NC1 220 40000
2)
1.2
Operate voltage, DC coil 75% of rated coil voltage
Release voltage, DC coil 10% of rated coil voltage
1) Coil resistance ±12%, 2) Coil resistance ±15%.
3) Protection diode PD; standard polarity: +A1 / -A2.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
