–1–
ASCTB266E 201408-T
DIMENSIONS (mm inch)
FIXING AND REMOVAL METHOD
ACCESSORIES
DSP RELAYS
PC BOARD SOCKETS
TYPES AND APPLICABLE RELAYS
TYPES
Standard packing: Carton: 50 pcs.; Case: 500 pcs.
SPECIFICATIONS
Type No.
Applicable
relays
For DSP1a For DSP1a, DSP1, DSP2a
DSP1a-PS DSP1a-PSL2 DSP2a-PS DSP2a-PSL2
DSP1a relays OK OK OK OK
DSP1a-L2 relays OK OK
DSP1 relays OK OK
DSP1-L2 relays OK
DSP2a relays OK OK
DSP2a-L2 relays OK
Product name
Part No.
For Single side stable For 2 coil latching
For DSP1a DSP1a-PS DSP1a-PSL2
For DSP1a, DSP1, DSP2a DSP2a-PS DSP2a-PSL2
Item Specifications
Breakdown voltage
3,000 Vrms between terminals
(Except for the portion between coil terminals)
Insulation resistance 1,000 MΩ between terminals at 500 V
Heat resistance 150°C 302°F for 1 hour
Max. continuous current
8 A (DSP1a-PS and DSP1a-PSL2),
5 A (DSP2a-PS and DSP2a-PSL2)
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
External dimensions
11.00±0.60
.433±.024
17.00±0.60
.669±.024
0.30±0.10
.012±.004
3.70
.146
5.70
.224
4-0.65±0.10
4-.026±.004
4-0.80±0.10
4-.031±.004
2.54
.100
2.61
.103
23.00±0.60
Only 2 coil
latching type
.906±.024
7.62
.300
7.62
.300
7.62
.300
10.16
.400
PC board pattern (Bottom view)
DSP1a-PS, DSP1a-PSL2
Tolerance: ±0.1 ±.004
DSP2a-PS, DSP2a-PSL2
Tolerance: ±0.1 ±.004
12
15 16
58
2.54
2.54
1.2 dia.
047 dia.
.100
.100
12
15 16
58
129
2.54
2.54
1.2 dia.
047 dia.
.100
.100
Note: Terminal No.2 and 15 are for
DSP1a-PSL2 only.
Note: Terminal No.2 and 15 are for
DSP2a-PSL2 only.
CAD Data
1. Match the direction of relay and socket.
2. Both ends of relays are fixed so tightly
that the socket hooks on the top surface
of relays.
3. Remove the relay, applying force in the
direction shown below.
4. In case there is not enough space for
finger to pick relay up, use screw drivers
in the way shown below.
Notes: 1. Exercise care when removing relays. If
greater than necessary force is applied at
the socket hooks, deformation may alter the
dimensions so that the hook will no longer
catch, and other damage may also occur.
2. It is hazardous to use IC chip sockets.
Good No good
