6 EMC/EMI Products Schaffner Group Datasheets 2018
Accessories for IEC Inlet Filters and Power Entry Modules
The accessories displayed are a selection of available accessories for IEC Inlet filters and IEC Power entry modules. As they are displayed in a general way there might
be variants of the filters where the accessories are not available.
For further information please ask your local Schaffner Sales Partner and visit our homepage http://www.schaffner.com/
.
PPoowwer Corer Cord with Ld with Lockockinging
SystSystem fem for Ior Inlet Fnlet Filtilters IL 13, ILers IL 13, IL
13 P13 P, IL 19, IL 19
Link to Datasheet: Datasheet IEC C13/
C19 locking cable
The locking system has a tensile force
of typical 200N.
It is recommended to use it with
flange mount filters.
Lock Power Cords with IEC Inlets and
Filters"
Schaffner power cords with IEC lock
guard against
accidental disconnection of all
electrical appliances
with an IEC inlet. No exchange or
modification of the
IEC inlet or IEC inlet filter system is
needed. Easy
retrofit for all electronic equipments
and devices.
IEC C13 RIEC C13 Reewirwireable Conneceable Connecttoror
ffor individual Por individual Poowwer Corer Cord withd with
LLockocking Systing Systemem
Link to Datasheet: Datasheet IEC C13
rewireable
The locking system has a tensile force
of typical 300N. It is recommended to
use it with flange mount filters. For
details refer to our Application Note
"Using IEC Lock Power Cords with IEC
Inlets and Filters" Schaffner power
connector with IEC lock guard against
accidental disconnection of all
electrical appliances with an IEC inlet.
No exchange or modification of the
IEC inlet or IEC inlet filter system is
needed. Easy retrofit for all electronic
equipments and devices.
IB - IIB - Insulating Bootsnsulating Boots
There is a full range of insulating boots
available from Schaffner that provide a
physical cover for the exposed
terminals on the back of IEC Inlet
Filters.
These boots fit the simplest non-fused
and unswitched style up to the fully
fused and switched IEC filtered inlet.
The boots are made from a durable
black PVC material that conforms to
UL94-V0 flammability requirements.
The boots slip easily over the back of
the filter and reduce the risk of
electrical shock to maintenance
personnel whilst protecting the filter
from environmental hazard such as
the ingress of dust and moisture.
