DY (ADY1, 3)
RATING
1. Coil data
1) Single side stable
2) 2 coil latching
2. Specifications
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
3V DC
70%V or less of
nominal voltage
(Initial)
10%V or more of
nominal voltage
(Initial)
66.6mA 45Ω
200mW
130%V of
nominal voltage
5V DC 40mA 125Ω
6V DC 33.3mA 180Ω
12V DC 16.6mA 720Ω
24V DC 8.3mA 2,880Ω
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
Set coil Reset coil Set coil Reset coil Set coil Reset coil
3V DC
70%V or less of
nominal voltage
(Initial)
70%V or less of
nominal voltage
(Initial)
66.6mA 66.6mA 45Ω 45Ω
200mW 200mW
130%V of
nominal voltage
5V DC 40mA 40mA 125Ω 125Ω
6V DC 33.3mA 33.3mA 180Ω 180Ω
12V DC 16.6mA 16.6mA 720Ω 720Ω
24V DC 8.3mA 8.3mA 2,880Ω 2,880Ω
Characteristics Item Specifications
Contact
Arrangement 1 Form A 1 Form A 1 Form B
Contact resistance (Initial) Max. 30 mΩ (By voltage drop 6 V DC 1A)
Contact material Au-flashed AgSnO
2 type
Rating
Nominal switching
capacity
Resistive load 10A 250V AC, 10A 30V DC 8A 250V AC, 8A 30V DC
Inductive load
(cos
φ
= 0.4, L/R = 7ms)
5A 250V AC 3.5A 250V AC
Max. switching
capacity
(Reference value)
Resistive load 2,500V A, 300W 2,000V A, 240W
Inductive load
(cos
φ
= 0.4, L/R = 7ms)
1,250V A 875V A
Max. switching voltage 380V AC, 125V DC
Max. switching current 10 A 8 A
Min. switching capacity (Reference value)*
1
5V 10mA
Nominal operating power 200 mW
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
Breakdown voltage
(Initial)
Between open contacts 1,000 Vrms for 1 min. (Detection current: 10 mA)
Between contact and coil 4,000 Vrms for 1 min. (Detection current: 10 mA)
Surge breakdown
voltage*
2
(Initial)
Between contact and coil 10,000 V
Temperature rise (coil) (at70°C 158°F) Max. 40°C (By resistive method, nominal voltage applied to the coil; max. switching current)
Operate time [Set time] (at 20°C 68°F) Max. 10 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Release time [Reset time] (at 20°C 68°F)
Max. 8 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Mechanical
characteristics
Shock resistance
Functional Min. 98 m/s
2
(Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
Destructive Min. 980 m/s
2
(Half-wave pulse of sine wave: 6 ms.)
Vibration resistance
Functional 10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10µs.)
Destructive 10 to 55 Hz at double amplitude of 3 mm
Expected life
Mechanical Min. 5×10
7
(at 300 times/min.)
Electrical
Min. 2×10
5
: 1 Form A inductive load (at 20 times/min.) (at rated load);
Min. 10
5
: 1 Form A resistive load,1 Form A 1 Form B resistive load,1 Form A 1 Form B
inductive load (at 20 times/min.) (at rated load)
Conditions
Conditions for operation, transport and storage*
3
Ambient temperature: –40°C to +70°C –40°F to +158°F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed (at rated load) 20 times/min.
Unit weight Approx. 6g .21oz
ASCTB182E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
