DY (ADY1, 3)
DIMENSIONS (mm inch)
FIXING AND REMOVAL METHOD
ACCESSORIES
DY RELAY
SOCKET
FEATURES
DY relay sockets that can be used also
for DK relay.
TYPES
Standard packing: Carton: 50 pcs.; Case: 500 pcs
Type Part No.
1 Form A
Single side
stable
DK1a-PS
2 coil
latching
DK1a-PSL2
1 Form A 1 Form B
Single side
stable
DK2a-PS
2 coil
latching
DK2a-PSL2
RELAY COMPATIBILITY
Socket
Relay
1 Form A 1 Form A 1 Form B
Single side
stable type
2 coil
latching type
Single side
stable type
2 coil
latching type
1 Form A
Single side stable type ——
2 coil latching type — ——
1 Form A 1 Form B
Single side stable type — —
2 coil latching type — — —
SPECIFICATIONS
Item Specifications
Breakdown
voltage
4,000 Vrms
(Detection current: 10 mA)
(Except the portion between
coil terminals)
Insulation
resistance
Min. 1,000 mΩ (at 500 V DC)
Heat resistance 150°C (for 1 hour)
Max. continuous
current
10 A (DK1a-PS, DK1a-PSL2),
8 A (DK2a-PS, DK2a-PSL2)
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e
External dimensions
General tolerance: ±0.3 ±.012
23±0.6
15±0.6
0.8
13.7±0.6
6±0.3
3.4±0.3
17±0.6
0.25
0.3±0.1
2.54±0.1
7.62±0.37.62±0.3
10.16±0.3
.906±.024
.591±.024
.031
.539±.024
.134±.012
.669±.024
.010
.012±.004
.100±.004
.300±.012.300±.012
.400±.012
.236±.012
PC board pattern (Bottom view)
1 Form A
The above shows 2 coil latching type. No.2 and 5
terminal are eliminated on single side stable type.
1 Form A 1 Form B
Tolerance: ±0.1 ±.004
The above shows 2 coil latching type. No.2 and 7
terminal are eliminated on single side stable type.
2.54
2.54
1.2 dia.
12
65
43
.100
.100
.047 dia.
2.54
2.54
12
65
87
43
1.2 dia.
.100
.100
.047 dia.
CAD Data
1. Match the direction of relay and socket.
2. Both ends of the relay are to be
secured firmly so that the socket hooks
on the top surface of the relay.
3. Remove the relay, applying force in the
direction shown below.
4. In case there is not enough space to
grasp relay with fingers, use screwdrivers
in the way shown below.
Notes: 1. Exercise care when removing relays. If
greater than necessary force is applied at
the socket hooks, deformation may alter the
dimensions so that the hook will no longer
catch, and other damage may also occur.
2. It is hazardous to use IC chip sockets.
GOOD NO GOOD
ASCTB267E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
RoHS compliant