OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HCPL-M454-500E

P1-P3P4-P6P7-P9P10-P12
Features
• Function compatible with HCPL-4504
• Surface mountable
• Very small, low prole JEDEC registered package
outline
• Compatible with infrared vapor phase reow and
wave soldering processes
• Short propagation delays for TTL and IPM
applications
• Very high common mode transient immunity:
Guaranteed 15 kV/µs at V
CM
= 1500 V
• High CTR: >25% at 25°C
• Guaranteed specications for common IPM
applications
• TTL compatible
• Guaranteed ac and dc performance over
temperature: 0°C to 70°C
• Open collector output
• Safety approval:
UL Recognized 3750 Vac / 1 min. per UL 1577
IEC/EN/DIN EN 60747-5-2
Approved V
IORM
= 560 Vpeak for Option 060.
CSA Approved
• Lead free option “-000E”
Applications
• Inverter Circuits and Intelligent Power Module
(IPM) Interfacing: Shorter propagation delays and
guaranteed (t
PLH
- t
PHL
) specications. (See power
inverter dead time section)
• High speed logic ground isolation: TTL/TTL, TTL/LTTL,
TTL/CMOS, TTL/LSTTL
• Line Receivers: High common mode transient
immunity (>15 kV/µs for a TTL load/drive) and low
input-output capacitance (0.6 pF)
• Replace pulse transformers: ave board space and
weight
• Analog signal ground isolation: Integrated
photon detector provides improved linearity over
phototransistors
CAUTION: The small junction sizes inherent to the design of this bipolar component increase the component's susceptibility to
damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and assembly of this
component to prevent damage and/or degradation which may be induced by ESD.
HCPL-M454
Ultra High CMR, Small Outline, 5 Lead, High Speed Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-M454 is similar to Avago’s other high speed
transistor output optocouplers, but with shorter propa-
gation delays and higher CTR. The HCPL-M454 also has
a guaranteed propagation delay dierence (t
PLH
- t
PHL
).
These features make the HCPL-M454 an excellent solu-
tion to IPM inverter dead time and other switching prob-
lems.
The HCPL-M454 CTR, propagation delays, and CMR are
specied both for TTL load and drive conditions and for
IPM (Intelligent Power Module) load and drive condi-
tions. Specications and typical performance plots for
both TTL and IPM conditions are provided for ease of ap-
plication.
This diode-transistor optocoupler uses an insulating lay-
er between the light emitting diode and an integrated
photon detector to provide electrical insulation between
input and output. Separate connections for the photo-
diode bias and output transistor collector increase the
speed up to a hundred times over that of a conventional
MXXX
XXX
6
5
43
1
7.0 ± 0.2
(0.276 ± 0.008)
2.5 ± 0.1
(0.098 ± 0.004)
0.102 ± 0.102
(0.004 ± 0.004)
V
CC
V
OUT
GNDCATHODE
ANODE
4.4 ± 0.1
(0.173 ± 0.004)
1.27
(0.050)
BSC
0.15 ± 0.025
(0.006 ± 0.001)
0.71
(0.028)
MIN.
0.4 ± 0.05
(0.016 ± 0.002)
3.6 ± 0.1*
(0.142 ± 0.004)
TYPE NUMBER (LAST 3 DIGITS)
DATE CODE
MAX. LEAD COPLANARITY
= 0.102 (0.004)
DIMENSIONS IN MILLIMETERS (INCHES)
* MAXIMUM MOLD FLASH ON EACH SIDE IS 0.15 mm (0.006)
NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.
7° MAX.
Outline Drawing (JEDEC MO-155)
Ordering Information
HCPL-M454 is UL Recognized with 3750 Vrms for 1 minute per UL1577.
Option
Part RoHS non RoHS Surface Tape IEC/EN/DIN
Number Compliant Compliant Package Mount & Reel EN 60747-5-2 Quantity
-000E no option X 100 per tube
HCPL-M454 -500E #500 SO-5 X X 1500 per reel
-060E -060 X X 100 per tube
-560E -560 X X X 1500 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-M454-560E to order product of SO-5 Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN
60747-5-2 Safety Approval and RoHS compliant.
Example 2:
HCPL-M454 to order product of SO-5 Surface Mount package inTube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since July 15, 2001 and
RoHS compliant will use ‘–XXXE.’
Absolute Maximum Ratings
(No Derating Required up to 85°C)
Storage Temperature .............................................................................-55°C to +125°C
Operating Temperature ........................................................................-55°C to +100°C
Average Input Current - I
F
.................................................................................25 mA
[1]
Peak Input Current - I
F
........................................................................................50 mA
[2]
(50% duty cycle, 1 ms pulse width)
Peak Transient Input Current - I
F
............................................................................1.0 A
(≤1 µs pulse width, 300 pps)
Reverse Input Voltage - V
R
(Pin 3-1) .............................................................................5 V
Input Power Dissipation ......................................................................................45 mW
[3]
Average Output Current - I
O
(Pin 5) ....................................................................... 8 mA
Peak Output Current .................................................................................................16 mA
Output Voltage - V
O
(Pin 5-4) .....................................................................-0.5 V to 20 V
Supply Voltage - V
CC
(Pin 6-4) ....................................................................-0.5 V to 30 V
Output Power Dissipation ............................................................................... 100 mW
[4]
Infrared and Vapor Phase Reow Temperature ....................................... see below
Solder Reow Thermal Prole
0
TIME (SECONDS)
TEMPERATURE (°C)
200
100
50 150100 200 250
300
0
30
SEC.
50 SEC.
30
SEC.
160°C
140°C
150°C
PEAK
TEMP.
245°C
PEAK
TEMP.
240°C
PEAK
TEMP.
230°C
SOLDERING
TIME
200°C
PREHEATING TIME
150°C, 90 + 30 SEC.
2.5°C ± 0.5°C/SEC.
3°C + 1°C/–0.5°C
TIGHT
TYPICAL
LOOSE
ROOM
TEMPERATURE
PREHEATING RATE 3°C + 1°C/–0.5°C/SEC.
REFLOW HEATING RATE 2.5°C ± 0.5°C/SEC.
Note: Non-halide ux should be used.
P1-P3P4-P6P7-P9P10-P12

HCPL-M454-500E

Mfr. #:
Buy HCPL-M454-500E
Manufacturer:
Broadcom / Avago
Description:
High Speed Optocouplers 1MBd 3750Vdc
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet