LH1529FPTR, LH1529GP, LH1529GPTR
www.vishay.com
Vishay Semiconductors
Rev. 1.7, 03-Aug-11
1
Document Number: 83828
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Telecom Switch - 1 Form A Solid-State Relay
DESCRIPTION
The LH1529FP and LH1529GP telecom switches consist of
an optically coupled solid state relay (SSR) and a
bidirectional input optocoupler. The SSR is ideal for
performing switch hook and dial-pulse switching while the
optocoupler performs ring detection and loop current
sensing functions. Both the SSR and optocoupler provide
3000 V
RMS
of input to output isolation.
The SSR is integrated on a monolithic receptor die using
high voltage technology. The SSR features low on
resistance, high breakdown voltage and current-limit
circuitry that protects the relay from telephone line induced
lightning surges.
The optocoupler provides bidirectional current sensing via
two anti parallel GaAs infrared emitting diodes. The opto
channel provides a minimum CTR of 33 % at 6 mA.
The LH1529FP and LH1529GP come in an 8 pin, 0.080"
thick plastic flat pak, SMD.
FEATURES
• Solid-state relay and optocoupler in one
package
• Surface mount package - new flat pak
• Isolation test voltage, 3000 V
RMS
• LH1529FP, CTR min. = 33 %
• LH1529GP, CTR min. = 100 %
• Optocoupler
- Bidirectional current detection
• Solid-state relay (equivalent to TS117P)
- Typical R
ON
20
- Load voltage 350 V
- Load current 120 mA
- Current limit protection
- High surge capability
- Clean bounce free switching
- Low power consumption
- High reliability monolithic detector
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
• PCMCIA/Notebook
• General telecom switching
- On/off hook control
- Dial pulse
- Ring current detection
- Loop current sensing
Note
• See “solid-state relays” (application note 56)
S
S'
1
2
3
45
6
7
8
AGENCY APPROVALS
UL1577: file no. E52744 system code O, double protection
DIN EN: 60747-5-2 (VDE 0884)/60747-5-5 (pending),
available with option 1
FIMKO: approval
ORDERING INFORMATION
LH1529##TR
PART NUMBER PACKAGE
CONFIG.
TAPE AND
REEL
PACKAGE UL, FIMKO
SMD-8, tape and reel LH1529FPTR
SMD-8, tubes LH1529GP
SMD-8, tape and reel LH1529GPTR
7 mm
SMD-#