134D
www.vishay.com
Vishay Sprague
Revision: 21-Mar-13
1
Document Number: 40072
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Wet Tantalum HI-TMP
®
Capacitors Tantalum Case with
Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation
FEATURES
• High capacitance
• Hermetically sealed, tantalum case
• + 200 °C high temperature
•Terminations: Axial, standard tin/lead (SnPb)
• 100 % tin (RoHS-compliant) available
• Mounting: Through-hole
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
APPLICATIONS
• Industrial
• Petroleum exploration
• High temperature/high stress environment
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C (to + 200 °C
with voltage derating)
Capacitance Tolerance: At 120 Hz, + 25 °C; ± 20 %
standard; ± 10 %
DC Leakage Current (DCL Max.): At + 25 °C and above:
Leakage current shall not exceed the values listed in the
Standard Ratings tables.
Life Test: Capacitors are capable of withstanding a 500 h
life test at a temperature of + 200 °C at the applicable
derated DC working voltage.
Note
• Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the
unit weight.
Note
(1)
For insulated parts, add 0.015 inches [0.38 mm] to the diameter. The insulation shall lap over the ends of the capacitor body.
ORDERING INFORMATION
134D 227 X0 100 K 6 E3
TYPE CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85 °C
CASE
CODE
STYLE NUMBER RoHS COMPLIANT
This is expressed in
picofarads. The first
two digits are the
significant figures. The
third is the number of
zeros to follow
X0 = ± 20 %
X9 = ± 10 %
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an “R”
(6R3 = 6.3 V)
See
Ratings
and Case
Codes
table
High temperature
8 = No outer
insulating sleeve
6 = High
temperature
film insulation
(above + 125 °C)
E3 = 100 % tin
termination
(RoHS compliant design)
Blank = SnPb
termination
(standard design)
DIMENSIONS in inches [millimeters]
CASE CODE
DL
1
(1)
L
2
(Max.) E
WEIGHT (g)
(Max.)
TYPE 134D CLR 79/81 EQUIV.
CT1
0.188 ± 0.016
[4.78 ± 0.41]
0.453 + 0.031/- 0.016
[11.51 + 0.79/- 0.41]
0.734
[18.64]
1.500 ± 0.250
[38.10 ± 6.35]
2.6
FT2
0.281 ± 0.016
[7.14 ± 0.41]
0.641 + 0.031/- 0.016
[16.28 + 0.79/- 0.41]
0.922
[23.42]
2.250 ± 0.250
[57.15 ± 6.35]
6.2
TT3
0.375 ± 0.016
[9.53 ± 0.41]
0.766 + 0.031/- 0.016
[19.46 + 0.79/- 0.41]
1.047
[26.59]
2.250 ± 0.250
[57.15 ± 6.35]
11.6
KT4
0.375 ± 0.016
[9.53 ± 0.41]
1.062 + 0.031/- 0.016
[26.97 + 0.79/- 0.41]
1.343
[34.11]
2.250 ± 0.250
[57.15 ± 6.35]
17.7
L
2
Weld
Tantalum
0.0253 ± 0.002 [0.64 ± 0.05] dia.
(No. 22 AWG tinned nickel leads
solderable and weldable)
D
EL
1
E