OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

APPA3010ZGCK

P1-P3P4-P4
© 2018 Kingbright. All Rights Reserved. Spec No: DSAN5348 / 1203014019 Rev No: V.4B Date: 06/13/2018
Page 1 / 4
DESCRIPTIONS
The Green source color devices are made with
InGaN on Sapphire Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
3.0 x 2.5 x 1.0 mm right angle SMD LED, 1.0 mm
thickness
Low power consumption
Ideal for back light and indicator
Package: 2000 pcs / reel
Moisture sensitivity level: 3
Tinned pads for improved solderability
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
SELECTION GUIDE
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Part Number
Emitting Color
(Material)
Lens Type
Iv (mcd) @ 20mA
[2]
Viewing Angle
[1]
Min. Typ. 2θ1/2
APPA3010ZGCK Water Clear
■ Green (InGaN)
500 700 30°
APPA3010ZGCK
3.0 mm x 1.0 mm Right Angle SMD Chip LED Lamp
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
© 2018 Kingbright. All Rights Reserved. Spec No: DSAN5348 / 1203014019 Rev No: V.4B Date: 06/13/2018
Page 2 / 4
ABSOLUTE MAXIMUM RATINGS at T
A
=25°C
ELECTRICAL / OPTICAL CHARACTERISTICS at T
A
=25°C
APPA3010ZGCK
Parameter Symbol Emitting Color
Value
Unit
Typ. Max.
Wavelength at Peak Emission I
F
= 20mA λ
peak
Green
515 - nm
Dominant Wavelength I
F
= 20mA λ
dom
[1]
Green 525 - nm
Spectral Bandwidth at 50% Φ REL MAX
I
F
= 20mA
Δλ Green 35 - nm
Capacitance C Green 45 - pF
Forward Voltage I
F
= 20mA V
F
[2]
Green 3.3 4.1 V
Reverse Current (V
R
= 5V) I
R
Green - 50 uA
Parameter Symbol Value Unit
Power Dissipation P
D
102.5 mW
Reverse Voltage V
R
5 V
Junction Temperature T
j
115 °C
Operating Temperature T
op
-40 to +85 °C
Storage Temperature T
stg
-40 to +85 °C
DC Forward Current I
F
25 mA
Peak Forward Current I
FM
[1]
150 mA
Electrostatic Discharge Threshold (HBM)
-
450 V
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2018 Kingbright. All Rights Reserved. Spec No: DSAN5348 / 1203014019 Rev No: V.4B Date: 06/13/2018
Page 3 / 4
0.5 0.5
90°
15°
0°
30°
45°
60°
75°
-15°
-30°
-45°
-60°
-75°
-90°
0.01.0 1.0
T
a
= 25 °C
TECHNICAL DATA
0%
20%
40%
60%
80%
100%
350 400 450 500 550 600 650 700 750 800
T
a
= 25 °C
Green
Wavelength (nm)
Relative Intensity (a. u.)
RELATIVE INTENSITY vs. WAVELENGTH
TAPE SPECIFICATIONS
(units : mm)
REEL DIMENSION (units : mm)
REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS
SPATIAL DISTRIBUTION
APPA3010ZGCK
Notes:
1. Don't cause stress to the LEDs while it is exposed to high temperature.
2. The maximum number of reflow soldering passes is 2 times.
3. Reflow soldering is recommended. Other soldering methods are not recommended as they might
cause damage to the product.
0
10
20
30
40
50
2.0 2.5 3.0 3.5 4.0 4.5
T
a
= 25 °C
Forward voltage (V)
Forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
0 1020304050
T
a
= 25 °C
Forward current (mA)
Luminous intensity normalised at
20 mA
0
10
20
30
40
50
-40-20 0 20406080100
Ambient temperature (°C)
Permissible forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
-40-200 20406080100
Ambient temperature (°C)
Luminous intensity normalised at
T
a
= 25 °C
GREEN
Forward Current vs.
Forward Voltage
Luminous Intensity vs.
Forward Current
Forward Current Derating Curve
Luminous Intensity vs.
Ambient Temperature
P1-P3P4-P4

APPA3010ZGCK

Mfr. #:
Buy APPA3010ZGCK
Manufacturer:
Kingbright
Description:
Standard LEDs - SMD 3x1mm SMD RA GREEN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet