OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

WP7104VRVCW/A

P1-P3P4-P5
© 2017 Kingbright. All Rights Reserved. Spec No: DSAP1067 / 1101027993 Rev No: V.1B Date: 05/08/2017
Page 1 / 5
DESCRIPTIONS
The source color devices are made with InGaN Light
Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
Low power consumption
Popular T-1 diameter package
General purpose leads
Reliable and rugged
Long life - solid state reliability
Available on tape and reel
RoHS compliant
APPLICATIONS
Status indicator
Illuminator
Signage applications
Decorative and entertainment lighting
Commercial and residential architectural lighting
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
SELECTION GUIDE
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Part Number
Emitting Color
(Material)
Lens Type
Iv (mcd) @ 20mA
[2]
Viewing Angle
[1]
Min. Typ. 2θ1/2
WP7104VRVCW/A White Diffused
■ Pink (InGaN)
400 1000 40°
WP7104VRVCW/A
T-1 (3mm) Solid State Lamp
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change
without prior notice.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAP1067 / 1101027993 Rev No: V.1B Date: 05/08/2017
Page 2 / 5
Parameter Symbol Value Unit
Power Dissipation P
D
120 mW
Reverse Voltage V
R
5 V
Junction Temperature T
j
115 °C
Operating Temperature T
op
-40 to +85 °C
Storage Temperature T
stg
-40 to +85 °C
DC Forward Current I
F
30 mA
Peak Forward Current I
FM
[1]
100 mA
Electrostatic Discharge Threshold (HBM)
-
250 V
Thermal Resistance (Junction / Ambient) R
th
JA
[2]
650 °C/W
Thermal Resistance (Junction / Solder point) R
th
JS
[2]
340 °C/W
Lead Solder Temperature
[3]
260°C For 3 Seconds
Lead Solder Temperature
[4]
260°C For 5 Seconds
ABSOLUTE MAXIMUM RATINGS at T
A
=25°C
ELECTRICAL / OPTICAL CHARACTERISTICS at T
A
=25°C
Notes:
1. Measurement tolerance of the chromaticity coordinates is ± 0.02.
2. Forward voltage: ±0.1V.
3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
WP7104VRVCW/A
Parameter Symbol Emitting Color
Value
Unit
Typ. Max.
Chromaticity Coordinates x
I
F
= 20mA
x
[1]
Pink 0.35 - -
Chromaticity Coordinates y
I
F
= 20mA
y
[1]
Pink 0.15 - -
Capacitance C Pink 100 - pF
Forward Voltage I
F
= 20mA V
F
[2]
Pink 3.3 4.0 V
Reverse Current (V
R
= 5V) I
R
Pink - 50 uA
Temperature Coefficient of x
I
F
= 20mA, -10°C ≤ T ≤ 85°C
TC
x
Pink -0.1 - 10
-3
/°C
Temperature Coefficient of y
I
F
= 20mA, -10°C ≤ T ≤ 85°C
TC
y
Pink -0.2 - 10
-3
/°C
Temperature Coefficient of V
F
I
F
= 20mA, -10°C ≤ T ≤ 85°C
TC
V
Pink -3 - mV/°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. R
th
JA
,R
th
JS
Results from mounting on PC board FR4 (pad size ≥ 16 mm
2
per pad).
3. 2mm below package base.
4. 5mm below package base.
5. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAP1067 / 1101027993 Rev No: V.1B Date: 05/08/2017
Page 3 / 5
0.5 0.5
90°
15°
0°
30°
45°
60°
75°
-15°
-30°
-45°
-60°
-75°
-90°
0.01.0 1.0
T
a
= 25 °C
TECHNICAL DATA
SPATIAL DISTRIBUTION
0
10
20
30
40
50
2.0 2.4 2.8 3.2 3.6 4.0
T
a
= 25 °C
Forward voltage (V)
Forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
0 1020304050
T
a
= 25 °C
Forward current (mA)
Luminous intensity normalised
at 20mA
0
10
20
30
40
50
-40-20 0 20406080100
Ambient temperature (°C)
Permissible forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
-40-200 20406080100
Ambient temperature (°C)
Luminous intensity normalised
at T
a
= 25 °C
PINK
Forward Current vs.
Forward Voltage
Luminous Intensity vs.
Forward Current
Forward Current Derating Curve
Luminous Intensity vs.
Ambient Temperature
WP7104VRVCW/A
RECOMMENDED WAVE SOLDERING PROFILE
Notes:
1. Recommend pre-heat temperature of 105°C or less (as measured with a thermocouple
attached to the LED pins) prior to immersion in the solder wave with a maximum solder bath
temperature of 260°C
2. Peak wave soldering temperature between 245°C ~ 255°Cfor 3 sec (5 sec max).
3. Do not apply stress to the epoxy resin while the temperature is above 85°C.
4. Fixtures should not incur stress on the component when mounting and during soldering process.
5. SAC 305 solder alloy is recommended.
6. No more than one wave soldering pass.
PACKING & LABEL SPECIFICATIONS
P1-P3P4-P5

WP7104VRVCW/A

Mfr. #:
Buy WP7104VRVCW/A
Manufacturer:
Kingbright
Description:
Standard LEDs - Through Hole 3mm Thru-Hole LED Pink
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet