LOW SKEW, 1-TO16, DIFFERENTIAL-TO-2.5V LVPECL FANOUT
BUFFER
4 REVISION G 06/26/15
8530 DATA SHEET
Table 4B. Differential Input DC Characteristics, V
CC
= 3.3V ± 5%, V
CCO
= 2.5V ± 5%, V
EE
= 0V, T
A
= 0°C to 70°C
NOTE 1: Common mode input voltage is defined as V
IH
.
Table 4C. LVPECL DC Characteristics, V
CC
= 3.3V ± 5%, V
CCO
= 2.5V ± 5%, V
EE
= 0V, T
A
= 0°C to 70°C
NOTE 1: Outputs terminated with 50 to V
CCO
– 2V.
AC Electrical Characteristics
Table 5. AC Electrical Characteristics, V
CC
= 3.3V ± 5%, V
CCO
= 2.5V ± 5%, V
EE
= 0V, T
A
= 0°C to 70°C
NOTE: Electrical parameters are guaranteed over the specified ambient operating temperature range, which is established when device is
mounted in a test socket with maintained transverse airflow greater than 500 lfpm. Device will meet specifications after thermal equilibrium has
been reached under these conditions.
NOTE All parameters measured at 250MHz unless noted otherwise.
NOTE 1: Measured from the differential input crossing point to the differential output crossing point.
NOTE 2: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 3: Defined as skew between outputs at the same supply voltage and with equal load conditions. Measured at the differential cross
points.
NOTE 4: Defined as skew between outputs on different devices operating at the same supply voltage, same temperature and with equal load
conditions. Using the same type of inputs on each device, the outputs are measured at the differential cross points.
Symbol Parameter Test Conditions Minimum Typical Maximum Units
I
IH
Input High Current
CLK 150 µA
nCLK 5µA
I
IL
Input Low Current
CLK -5 µA
nCLK -150 µA
V
PP
Peak-to-Peak Input Voltage 0.15 1.3 V
V
CMR
Common Mode Input Voltage; NOTE 1 0.05 V
CC
– 0.85 V
Symbol Parameter Test Conditions Minimum Typical Maximum Units
V
OH
Output High Voltage; NOTE 1 V
CCO
– 1.1 V
CCO
– 0.7 V
V
OL
Output Low Voltage; NOTE 1 V
CCO
– 2.0 V
CCO
– 1.4 V
V
SWING
Peak-to-Peak Output Voltage Swing 0.55 0.93 V
Symbol Parameter Test Conditions Minimum Typical Maximum Units
f
MAX
Output Frequency 500 MHz
t
PD
Propagation Delay; NOTE 1 ƒ 500MHz 1 2 ns
tsk(o) Output Skew; NOTE 2, 3 26 50 ps
tsk(pp) Part-to-Part Skew; NOTE 2, 4 250 ps
t
R
/ t
F
Output Rise/ Fall Time 20% to 80% @ 50MHz 300 700 ps
odc Output Duty Cycle 47 50 53 %