12140

Adapters for Snaps Used as Electrical Connectors
For Grounding ESD Protective Workstations
Adapters for Various Brands of Wristbands and Ground Cords
Because of the possible confusion in
measurement of studs and sockets we
suggest that you try a sample of these
adapters before purchase. ESD
Systems.com will supply samples upon
request.
12140 Adapts a 3/8" (10mm) stud
to a 1/8" (4mm) socket
12142 Adapts a 1/4" (7mm) stud
to a 1/8" (4mm) socket
12144 Adapts a 3/8" (10mm)
socket to a 1/8" (4mm) stud
12146 Adapts a 1/4" (7mm) socket
to a 1/8" (4mm) stud
12148 Adapts a 1/4" (7mm) socket
to a 1/8" (4mm) socket
PS-2049 07/05 Page 1 of 2
Three Adapters to Adapt ESD Systems.com Ground Cords
to Other Wristbands
There are three connector systems
commonly used for ESD protective
grounding. These are the 4mm
(1/8"), 7mm (1/4") and 10mm (3/8")
snap. These are available in both
male (stud) and female (socket)
snaps.
No standard exists for connectors for
ESD protective grounding. The most
commonly used snaps may be found
in various products and in various
configurations depending upon the
original manufacturer.
ESD Systems.com has adapters
available to adapt ESD Systems.com
products to other manufacturer's
products. These adapters are
illustrated in this Tech Brief.
Two Adapters to Adapt ESD Systems.com Wristbands to
Other Ground Cords
ESD SYSTEMS.COM
CORD
Tech Brief
© 2005 DESCO INDUSTRIES INC.
Employee Owned
13160/13165
STUD
12120
10mm STUD
Adapters for Workstation Mat Grounding
PS-2049 Page 2 of 2
Limited Warranty
ESD Systems.com expressly warrants
that for a period of one (1) year from the
date of purchase, ESD Systems.com
adapters will be free of defects in
material (parts) and workmanship
(labor). Within the warranty period, a
unit will be tested, repaired or replaced
at our option, free of charge. Call
Customer Service at 508-485-7390 for a
Return Material Authorization (RMA)
and proper shipping instructions and
address. You should include a copy of
your original packing slip, invoice, or
other proof of purchase date. Any unit
under warranty should be shipped
prepaid to the ESD Systems.com factory.
Warranty repairs will take approximately
two weeks.
Warranty Exclusions
THE FOREGOING EXPRESS
WARRANTY IS MADE IN LIEU OF
ALL OTHER PRODUCT
WARRANTIES, EXPRESSED AND
IMPLIED, INCLUDING
MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE
WHICH ARE SPECIFICALLY
DISCLAIMED. The express warranty
will not apply to defects or damage due
to accidents, neglect, misuse, alterations,
operator error, or failure to properly
maintain, clean or repair products.
Limit of Liability
In no event will ESD Systems.com or
any seller be responsible or liable for any
injury, loss or damage, direct or
consequential, arising out of the use of or
the inability to use the product. Before
using, users shall determine the
suitability of the product for their
intended use, and users assume all risk
and liability whatsoever in connection
therewith.
13570/13575
BANANA JACK
12110
13264/13266
SOCKET
23600/23605
BANANA PLUG
12112
10mm SOCKET
13264/13266
SOCKET
12130
10mm SOCKET
13267
SOCKET
12134
7mm STUD
Visit our online
library of Tech Briefs:
http://www.esdsystems.com
432 NORTHBORO ROAD CENTRAL
MARLBORO, MA 01752-3170
PHONE (508) 485-7390
FAX (508) 480-0257
© 2005 DESCO INDUSTRIES INC.
Employee Owned

12140

Mfr. #:
Manufacturer:
Desco
Description:
Conn Barrier Strip 24 POS 9.53mm Screw ST Panel Mount 15A
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet