2917670 Datasheet 2917502, 2917670, 2917515 | P7-P8

ETD-BL-1T-F- 10S

103619_en_03 PHOENIX CONTACT 7

8 Time setting

A1+

A2-

–

0,1-10s

x10%

The time can be adjusted variably using a screwdriver (blade

width 2.5 mm). The value set on the knurled wheel multiplied

by 10 gives the percentage set value of the time end value.

Example:

Time end range of the time relay = 10s

1 Setting on the knurled wheel = 6 6 x 10% = 60%

Time end range of the time relay = 10s 60 % of10 s = 6s

According to the setting of the knurled wheel (1...10), you can

also read the time directly from the "Time setting for different

time setting ranges" table.

Time settings for various time setting ranges:

Position

Knurled wheel

0.1 - 10 s

time [seconds]

3 - 300 s

time [seconds]

0.3 - 30 min

time [minutes]

3 - 300 min

time [minutes]

00,130,33

1130330

2260660

3390990

4 4 120 12 120

5 5 150 15 150

6 6 180 18 180

7 7 210 21 210

8 8 240 24 240

9 9 270 27 270

10 10 300 30 300

The following table shows some examples: All intermediate values (e.g. 1.5) can be adjusted.

The smallest adjustable time is reached at position "0". No time can be set between "10" and "0". This area is

identified with a quickly flashing geed LED.

ETD-BL-1T-F- 10S

103619_en_03 8

PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany

phoenixcontact.com

9Diagnostics

The LEDs indicate the following error states:

LED U/t (green, backlighting of the knurled wheel)

– Flashes: Voltage is present, the set time is elapsing

– Flashing quickly: Undefined time range between "10" and "0" adjusted

– On: Voltage is present, the set time has elapsed

LED R (yellow)

– On: The output relay has picked up

– Off: The output relay is dropped

10 Connection example

24 VDC

–

A1+

A2–

12 14

11 Function

LED U/t

LED R

t t t t t

F: Flashing beginning with pulse

When supply voltage U is applied, the output relay picks up

(yellow LED R lights up) and the set time t starts running

(green LED U/t flashes). After time t has elapsed, the output

relays drop out (yellow LED R is not lit) and the set time t starts

running again. The output relay is activated at a ratio of 1:1,

until the supply voltage is interrupted.

Since only one time setting is possible, the pulse and pause

times are identical for the flasher function.

P1-P3 P4-P6 P7-P8

2917670

Mfr. #:

Buy 2917670

Manufacturer:

Phoenix Contact

Description:

Time Delay & Timing Relays ETD-BL-1T-F- 30MIN-SP

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

2917670

2917670

Products related to this Datasheet