MAX15012/MAX15013
175V/2A, High-Speed,
Half-Bridge MOSFET Drivers
4 _______________________________________________________________________________________
Note 2: All devices are 100% tested at T
A
= +125°C. Limits over temperature are guaranteed by design.
Note 3: Ensure that the V
DD
-to-GND or BST-to-HS transient voltage does not exceed 13.2V.
Note 4: Maximum operating supply voltage (V
DD
) reduces linearly from 12.6V to 10.5V with its maximum voltage (V
HS_MAX
) increasing
from 125V to 175V. See the Typical Operating Characteristics and Applications Information sections.
Note 5: Guaranteed by design, not production tested.
Note 6: See the Minimum Input Pulse Width section.
ELECTRICAL CHARACTERISTICS (continued)
(V
DD
= V
BST
= +8V to +12.6V, V
HS
= GND = 0V, T
A
= T
J
= -40°C to +125°C, unless otherwise noted. Typical values are at V
DD
=
V
BST
= +12V and T
A
= +25°C.) (Note 2)
t
D_OFF
Figure 1, C
L
= 1000pF
(Note 5)
TTL 35 63
ns
Delay Matching Between Driver-
Low and Driver-High
t
MATCH
C
L
= 1000pF, Figure 1 (Note 5) 2 8 ns
Internal Nonoverlap 1ns
V
DD
= V
BST
= 12V