3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Digital Data Transmission System - 20 to 20 Position 14520-EZAB-XXX-0EC
Physical
Electrical
Environmental
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
″Vesa″ is a trademark of Video Electronics Standards Association Corporation.
″PanelLink″ and ″TMDS″ are trademarks of Silicon Image, Inc.
Connector Contact Plating
Wiping Area:
30 µ" [0.76µm] Min. Gold
Shell
Color:
Beige
Material:
Acrylonitrile Butadiene Styrene (ABS)
Cable Color:
Beige
Jacket Material:
Polyvinyl Chloride (PVC)
Flammability:
AWM VW-1
Voltage Rating:
30 V
Current Rating:
1 A
Insulation Resistance:
> 1 × 10
8
Ω
at 100 VDC
Withstanding Voltage:
350 Vrms for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance:
100 ± 10Ω
Conductor Size:
28 AWG Stranded
Propogation Velocity:
1.25 ns/ft [4.1 ns/m ]
Temperature Rating:
-20°C to +75°C
TS-0858-10
Sheet 1 of 3
• Supports new VESA™/ DFP standard for 20
position MDR at host device
• LCD monitor assembly for PanelLink® /
TMDS™ interface
• Each differential twin-ax pair has foil shield
and drain wire
• Entire cable bundle is shielded with foil and
braid for additional signal protection
• Rugged MDR ribbon type contact
• Quick release latches
• RoHS* compliant
Date Modified: May 22, 2006
UL File No.: E86982
