ICS553
LOW SKEW 1 TO 4 CLOCK BUFFER FAN OUT BUFFER
IDT®
LOW SKEW 1 TO 4 CLOCK BUFFER 3
ICS553 REV N 051310
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS553. These ratings, which
are standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the
device at these or any other conditions above those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can
affect product reliability. Electrical parameters are guaranteed only over the recommended operating
temperature range.
Recommended Operation Conditions
DC Electrical Characteristics
VDD=2.5 V ±5%, Ambient temperature -40 to +85° C, unless stated otherwise
Item Rating
Supply Voltage, VDD 7 V
Output Enable and All Outputs -0.5 V to VDD+0.5 V
ICLK -0.5 V to 5.5 V
Ambient Operating Temperature (commercial) 0 to +70
° C
Ambient Operating Temperature (industrial) -40 to +85
° C
Storage Temperature -65 to +150
° C
Junction Temperature 125
° C
Soldering Temperature 260
° C
Parameter Min. Typ. Max. Units
Ambient Operating Temperature (commercial) 0 +70 ° C
Ambient Operating Temperature (industrial) -40 +85
° C
Power Supply Voltage (measured in respect to GND) +2.375 +5.25 V
Parameter Symbol Conditions Min. Typ. Max. Units
Operating Voltage VDD 2.375 2.625 V
Input High Voltage, ICLK V
IH
Note 1 VDD/2+0.5 5.5 V
Input Low Voltage, ICLK V
IL
Note 1 VDD/2-0.5 V
Input High Voltage, OE V
IH
1.8 VDD V
Input Low Voltage, OE V
IL
0.7 V
Output High Voltage V
OH
I
OH
= -16 mA 2 V
Output Low Voltage V
OL
I
OL
= 16 mA 0.4 V
Operating Supply Current IDD No load, 135 MHz 25 mA
Nominal Output Impedance Z
O
20 Ω
Input Capacitance C
IN
ICLK, OE pin 5 pF
Short Circuit Current I
OS
±28 mA