©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
| Indicates Change
Class I Data Classification - See Policy TEC-02-04
K-Type markers are used to identify wire bundles, cables, pipes
and conduits. The oval shaped profile has been designed to allow
markers to be accurately positioned onto a carrier strip. The
marker and carrier strip assembly is attached to the substrate
using cable ties. K-Type markers are ideal for post termination
applications or where retrofitting is required.
Markers are supplied as internationally color coded yellow with
pre-printed black legends. K-Type markers come in one standard
size to fit carrier strips that can hold from 7 to 18 markers and are
made from a plasticized PVC material. Suitable for industrial
applications.
Operating Temperature Range -45°C to 70°C (-40°F to 158°F)
Resistant to key Industrial fluids, including
those used in Mass transit, aviation and
military (defined by RW-2535)
Information and a downloadable declaration covering RoHS and
REACH compliance can be found at the ‘TE Product Compliance
Support Centre’:
http://www.te.com/en/resources/product-compliance.html
Post termination cable identification
Identification of large cables, wire bundles,
pipework and conduit.
SPECIFICATIONS / APPROVALS
Installation friendly – easy to replace, ideal
for retrofitting and repairs. Only cable ties
are needed.
Electric and Electronic Equipment, Light
industrial
1361
1
4
01
Legend code
Color code
Packaging Code
Product size code
BS 6746C:1993 Colour chart for insulation and sheath of
electric cables
IEC 60304 Standard Colours for Insulation for Low
Frequency Cables and Wires
Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an
assessment of mark adherence to validate fit form and function. Further details can be found in TE standard
RW-2535.