ScotchCode™ STD Tape Dispenser
The ScotchCode STD Tape Dispenser is a compact, carry-
along dispenser with ten refillable compartments which hold
eight-foot rolls of non-smear polyester tape. Used for
marking binder groups, wire or cable, the tapes' high tack,
acrylic adhesive resists solvents, oil and water and adheres
firmly to insulation surfaces. An end loop hooks the
dispenser easily to a tool pouch or belt. Dispensers can be
ordered empty or filled with 10 rolls of either pre-printed
numbers 0-9 or NEMA colors.
148
Phone 800/245 3573 Fax 800/245 0329 3
Specifications and Ordering Information for ScotchCode Wire Marker Tape Dispensers
Product UPC Case
Number (054007-) Description Qty.
STD 12172 Dispenser only—holds 10 rolls 25
STD-X 49519 Dispenser only—holds 10 rolls 10
STD-0-9 12174 Dispenser filled with 10 rolls of
numbered tape (one each of 0–9) 25
STD-0-9X 49518 Dispenser filled with 10 rolls of
numbered tape (one each of 0–9) 10
STD-C 12175 Dispenser filled with 10 rolls of colored tape (one 25
each of black, blue, brown, green, gray, orange,
red, violet, white and yellow)
STD-CX 49517 Dispenser filled with 10 rolls of colored tape (one 10
each of black, blue, brown, green, gray, orange,
red, violet, white and yellow)
46
Features — Benefits
ScotchCode STD Wire Marker Tape Dispenser
Compact Design Easy to handle
Hangs from a tool belt Convenient
Provides contamination Markers stay clean & dry
protection around the wire
markers
Can be custom filled to meet No waste
specific project requirements
Dispenses only the desired Prevents waste
length
Holds ten rolls of SDR wire Compact
marking tape
ScotchCode SDR Dispenser Refill Rolls
This aggressive adhesive system, combined with the flexible
polyester film backing, provides a thin, conformable tape
that is durable and will hold up in most industrial electrical
applications. The smooth surface of this tape allows dirt and
grime to be easily wiped off, providing text legibility even
after extended exposure to a build-up of contamination.
ScotchCode SDR Wire Marking Tape is available in ten
NEMA colors, individual numbers and consecutive
numbers.
The SDR tape can be used for the following applications
involving operating temperatures between -40°F to 250°F
(-40°C and 121°C):
•Marking all types of wire and cable including power,
control, fiber optic, electronic, telecommunications, and
instrumentation
•Phase identification on large or small gauge wire or cable
•Identification of terminal blocks, terminal strips, and wire
in panel boards or a piece of switchgear
•Automotive applications on tubing, hoses and
replacement parts