OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

LQH2HPZ6R8MDRL

P1-P3P4-P6P7-P8
Spec No. JELF243A-9143-01 P1/8
MURATA MFG.CO., LTD
Reference Only
CHIP COIL（CHIP INDUCTORS）LQH2HPZ□□□□DRL SPECIFICATION
Murata Standard Reference Specification【AEC-Q200】
1. Scope
This reference specification applies to LQH2HPZ_DR Series, Chip coil (Chip Inductors) for Automotive Electronics based
on AEC-Q200 except for Power train and safety.
2. Part Numbering
(ex) LQ H 2H P Z 100 M D R L
Product ID
Structure Dimension
Applications Category Inductance Tolerance Dimension Others
Packaging
(L×W)
and
(T)
L: Φ180Taping
Characteristics
3. Rating
・Operating Temperature Range.
(Ambient temperature; Self-temperature rise is not included) -40 to +105°C
(Product temperature; Self- temperature rise is included) -40 to +125°C
・Storage Temperature Range. -40 to +105°C
Customer
Part Number
Murata
Part Number
Inductance
DC
Resistance
(Ω)
Self
Resonant
Frequency
(MHz min)
Rated Current (mA)
ESD
2：2kV
(µH)
Tolerance
(%)
∗1 Based
on
inductance
change
∗2 Based on
Temperature rise
∗3 Ambient
temperature
(85 )℃
∗4 Ambient
temperature
(105 )℃
LQH2HPZR47MDRL 0.47
M:±20
0.14±20% 120 1670 1250 750
2
LQH2HPZ1R0MDRL 1.0
0.24±20% 100 1370 960 580
LQH2HPZ1R5MDRL 1.5
0.29±20% 60 1120 900 540
LQH2HPZ2R2MDRL 2.2
0.34±20% 50 850 820 500
LQH2HPZ3R3MDRL 3.3
0.45±20% 45 750 730 440
LQH2HPZ4R7MDRL 4.7
0.56±20% 40 650 650 390
LQH2HPZ6R8MDRL 6.8
1.0±20% 35 550 490 300
LQH2HPZ100MDRL 10
1.2±20% 30 420 430 260
LQH2HPZ150MDRL 15
2.5±20% 25 340 290 180
LQH2HPZ220MDRL 22
3.0±20% 20 260 270 170
∗1: When applied Rated current to the Products, Inductance will be within ±30% of initial inductance value range .
∗2:
Keep the temperature(ambient temperature plus self-generation of heat) under 125 . ℃
∗3: When applied rated current to the Products, temperature rise caused by self-generated heat shall be limited
to 40 max.℃ (Ambient temperature 85℃).
∗4:When applied rated current to the Products,temperature rise caused by self-generated heat shall be limited to 20 ℃
max. (Ambient temperature 85-105℃).
4. Testing Conditions
《Unless otherwise specified》 《In case of doubt》
Temperature : Ordinary Temperature (15 to 35°C) Temperature : 20 ± 2°C
Humidity : Ordinary Humidity (25 to 85 % (RH)) Humidity : 60 to 70 %
(RH)
Atmospheric Pressure : 86 to 106 kPa
Spec No. JELF243A-9143-01 P2/8
MURATA MFG.CO., LTD
Reference Only
5. Appearance and Dimensions
※no marking
■Unit Mass (Typical value)
0.010ｇ
6. Electrical Performance
No. Item Specification Test Method
6.1 Inductance Inductance shall meet item 3. Measuring Equipment : KEYSIGHT 4192A or equivalent
Measuring Frequency: 1MHz
6.2 DC Resistance DC Resistance shall meet item 3. Measuring Equipment: Digital multi meter
6.3 Self Resonant
Frequency
(S.R.F)
S.R.F shall meet item 3. Measuring Equipment: KEYSIGHT E4991A or equivalent
7. AEC-Q200 Requirement
7.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
3 High
Temperature
Exposure
1000hours at 125 °C
Set for 24hours at room
temperature, then measured.
Meet Table A after testing.
Table A
4 Temperature Cycling 1000cycles
-40 °C to + 105 °C
Set for 24hours at room
temperature,then
measured.
Meet Table A after testing.
7 Biased Humidity 1000hours at 85 °C, 85%RH
unpowered.
Meet Table A after testing.
8 Operational Life Apply Rated Current 85 deg C
1000 hours
Set for 24hours at room
temperature, then measured
Meet Table A after testing.
9 External Visual Visual inspection
No abnormalities
10 Physical Dimension Meet ITEM 5
(Style and Dimensions)
No defects
2.5±0.1
1.57±0.2
0.85±0.2
2.0±0.1
0.55±0.05
(in mm)
Appearance No damage
Inductance Change (at 1MHz) Within ±10%
DC Resistance Change Within ±10%
Spec No. JELF243A-9143-01 P3/8
MURATA MFG.CO., LTD
Reference Only
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
12 Resistance
to Solvents
Per
MIL-STD-202
Method 215
Not Applicable
13 Mechanical Shock
Per MIL-STD-202
Method 213
Condition C
100g’s/6ms/Half sine
Meet Table A after testing.
14 Vibration 5g's for 20 minutes,
12cycles eah of 3 orientations
Test from 10-2000Hz.
Meet Table A after testing.
15 Resistance
to Soldering Heat
No-heating
Solder temperature
260C+/-5 deg C
Immersion time 10s
Pre-heating: 150 to 180C / 90±30s
Meet Table B after testing.
Table B
17 ESD
Per AEC-Q200-002 ESD Rank: Refer to Item 3. Rating
No defects
18 Solderbility Per J-STD-002 Method b : Not Applicable
90% of the terminations is to be soldered.
(Except exposed wire)
19 Electrical
Characterization
Measured : Inductance No defects
20 Flammability Per UL-94 Not Applicable
21 Board Flex Epoxy-PCB(1.6mm)
Deflection 2mm(min)
60s minimum holding time
Murata deviation request: 5s
Meet Table A after testing
22 Terminal Strength Per AEC-Q200-006
A force of 17.7N for 60s
Murata deviation request: 5N for 60s
No defects
8. Specification of Packaging
8.1 Appearance and Dimensions of plastic tape
(in mm)
Dimension of the Cavity is measured at the bottom side.
Appearance No damage
Inductance Change (at 1MHz) Within ±20%
DC Resistance Change Within ±10%
.
Φ1.5
+0.1
-0
2.3±0.1
2.8±0.1
4.0±0.1
4.0±0.1
2.0±0.05
3.5±0.05 1.75±0.1
8.0±0.2
0.7±0.1
(0.25)
Direction of feed
P1-P3P4-P6P7-P8

LQH2HPZ6R8MDRL

Mfr. #:
Buy LQH2HPZ6R8MDRL
Manufacturer:
Murata Electronics
Description:
Fixed Inductors 1008 6.8uH 20% 490mA 35MHz AEC-Q200
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet