KEMET Part Number: T493C106K025BH6410
(07016-121KBHC)
T493_DLA, Tantalum, MnO2 Tantalum, COTS, 10 uF, 10%, 25 VDC, SMD, MnO2, Molded, DLA Drawing, B (0.1%/1000 Hrs), 500
mOhms, 6032, Height Max = 2.8mm
Dimensions
Footprint 6032
L 6mm +/-0.3mm
W 3.2mm +/-0.3mm
H 2.5mm +/-0.3mm
S 1.3mm +/-0.3mm
F 2.2mm +/-0.1mm
Packaging Specifications
Weight: 224.2 mg
Packaging: T&R, 178mm
Packaging Quantity: 500
General Information
Supplier: KEMET
Series: T493_DLA
Dielectric: MnO2 Tantalum
Style: SMD Chip
Description:
SMD, MnO2, Molded, DLA
Drawing
RoHS: No
Termination: Solder Coated
Specifications
Capacitance: 10 uF
Capacitance Tolerance: 10%
Voltage DC:
25 VDC (85C), 16.75 VDC
(125C)
Temperature Range: -55/+125C
Rated Temperature: 85C
Dissipation Factor: 6.00% 120Hz 25C
Failure Rate: B (0.1%/1000 Hrs)
Resistance: 0.5 Ohms (100kHz 25C)
Leakage Current: 2.5 uA (5min 25C)
Testing and Reliability:
10 Cycles Surge Current Testing
At -55C And +85C Before
Weibull
© 2006 - 2018 IntelliData.net
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and
we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the
requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us
with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Generated 8/21/2018 - b57e1ed1-54d2-44e8-b65e-c2de95e29a73
