3002931 Datasheet 3002931 | P1-P3

https://www.phoenixcontact.com/pi/products/3002931

08/18/2018Page1/5

Distribution block-PTFIX 12X1,5-NS15A RD-3002931

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Distribution block, internally jumpered, nom. voltage: 500 V, nominal current: 17.5 A, connection method:

Push-in connection, number of connections: 12, cross section:0.14 mm²-1.5 mm², AWG:26-16, width: 27.4

mm, color: red, mounting type: NS 15

Why buy this product

Space-saving, thanks to the compact design

Flexible use, thanks to DIN rail and direct mounting

Space-saving potential distribution, thanks to compact micro potential distributors

Convenient test options, thanks to test openings at every terminal point

Clear arrangement thanks to marking of all terminal points

Key Commercial Data

Packing unit 20 STK

GTIN

GTIN 4055626433431

Technical data

General

Note

Notes on operation The blocks can be bridged with one another via the

conductor shaft. For corresponding plug-in bridges, see accessories

Notes on operation The D-PTFIX 1,5 cover (accessory) must be placed

on the end of the terminal strip

Number of levels 1

Number of connections 12

Potentials 1

Nominal cross section 1.5 mm²

Color red

Insulating material PA

Flammability rating according to UL 94 V0

Rated surge voltage 6 kV

https://www.phoenixcontact.com/pi/products/3002931

08/18/2018Page2/5

Distribution block-PTFIX 12X1,5-NS15A RD-3002931

Technical data

General

Degree of pollution 3

Overvoltage category III

Insulating material group I

Maximum power dissipation for nominal condition 0.56 W

Ambient temperature (operation) -60 °C ... 130 °C

Maximum load current 17.5 A

Nominal current I

17.5 A

Nominal voltage U

500 V

Open side panel No

Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11

Back of the hand protection guaranteed

Finger protection guaranteed

Result of surge voltage test Test passed

Surge voltage test setpoint 7.3 kV

Result of power-frequency withstand voltage test Test passed

Power frequency withstand voltage setpoint 1.89 kV

Result of the test for mechanical stability of terminal points (5 x

conductor connection)

Test passed

Result of bending test Test passed

Bending test rotation speed 10 rpm

Bending test turns 135

Bending test conductor cross section/weight 0.14 mm² / 0.2 kg

1.5 mm² / 0.4 kg

Tensile test result Test passed

Conductor cross section tensile test 0.14 mm²

Tractive force setpoint 10 N

Conductor cross section tensile test 1.5 mm²

Tractive force setpoint 40 N

Result of tight fit on support Test passed

Tight fit on carrier NS 15

Setpoint 5 N

Result of voltage-drop test Test passed

Requirements, voltage drop ≤ 3.2 mV

Result of temperature-rise test Test passed

Short circuit stability result Test passed

Conductor cross section short circuit testing 1.5 mm²

Short-time current 0.18 kA

Result of thermal test Test passed

Ageing test for screwless modular terminal block temperature cycles 192

Proof of thermal characteristics (needle flame) effective duration 30 s

Result of aging test Test passed

https://www.phoenixcontact.com/pi/products/3002931

08/18/2018Page3/5

Distribution block-PTFIX 12X1,5-NS15A RD-3002931

Technical data

General

Oscillation, broadband noise test result Test passed

Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03

Test spectrum Service life test category 2, bogie-mounted

Test frequency

= 5 Hz to f

= 250 Hz

ASD level

6.12 (m/s

)

/Hz

Acceleration 3.12 g

Test duration per axis 5 h

Test directions X-, Y- and Z-axis

Shock test result Test passed

Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03

Shock form Half-sine

Acceleration 30g

Shock duration 18 ms

Number of shocks per direction 3

Test directions X-, Y- and Z-axis (pos. and neg.)

Relative insulation material temperature index (Elec., UL 746 B) 125 °C

Temperature index of insulation material (DIN EN 60216-1 (VDE

0304-21))

125 °C

Static insulating material application in cold -60 °C

Dimensions

Width 27.4 mm

Length 21 mm

Height NS 15 27.2 mm

Connection data

Connection method Push-in connection

Connection in acc. with standard IEC 60947-7-1

Conductor cross section solid min. 0.14 mm²

Conductor cross section solid max. 1.5 mm²

Conductor cross section AWG min. 26

Conductor cross section AWG max. 16

Conductor cross section flexible min. 0.14 mm²

Conductor cross section flexible max. 1.5 mm²

Min. AWG conductor cross section, flexible 26

Max. AWG conductor cross section, flexible 16

Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm²

Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²

Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm²

Stripping length 8 mm ... 10 mm

Internal cylindrical gage A1 / B1

P1-P3 P4-P5

3002931

Mfr. #:

Buy 3002931

Manufacturer:

Phoenix Contact

Description:

DIN Rail Terminal Blocks PTFIX 12X1,5-NS15ARD

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

3002931