SRW12UG

SmartRack 12U Low-Profile Switch-Depth Wall-

Mount Rack Enclosure Cabinet with Clear Acrylic

Window

MODEL NUMBER: SRW12UG

Wall-mount cabinet secures and organizes 12U of 19-inch rack equipment up to 16.5 inches deep in

locations with limited floor space. Clear acrylic window allows you to monitor equipment without unlocking

door.

Description

The SRW12UG SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is

acoustic noise, but it also adds visual flair to your IT installation.

The side panels and front door lock securely to help prevent damage, tampering or theft. The top, bottom

and removable side panels are vented, which allows air to flow freely and keep equipment cool. The

reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top

and bottom ports allow easy cable routing.

The SRW12UG comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional

SRCASTER rolling caster kit to make it a mobile rack. Square and 12-24 threaded mounting holes and

numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch

increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch

panels.

●

Locking steel cabinet vented at

sides, top and bottom

●

Secures 12U of 19 in. rack

equipment up to 16.5 in. deep

●

Mounts to wall or rolls on floor

(with optional SRCASTER)

●

●

(20) M6 cage nuts

●

(20) M6 cup washers

●

(20) 12-24 screws

●

Removable mounting plate

●

(3) Mounting plate screws

Specifications

Saves Valuable Workspace

Perfect for network wiring closets, retail locations, classrooms, back offices and other areas with limited

floor space where you need equipment to be secure, organized and out of the way

●

Houses EIA-standard 19 in. rack equipment in 12U of space

●

●

Reduces acoustic noise

●

Provides extra visual flair

●

Keeps Important Equipment Secure

Side panels and front door lock securely to help prevent damage, tampering or theft

●

Vented panels allow generous airflow that keeps equipment cool

●

●

Mounts to wall or rolls on floor with Tripp Lite’s optional SRCASTER caster kit

●

Wall-mounting holes spaced 16 in. apart for standard wall stud placement

●

Vertical mounting rails adjust in 7/8 in. increments tto accommodate equipment up to 16.5 in. deep,

such as network switches and patch panels

●

Rails support square-hole or 12-24 threaded-hole mounting

●

OVERVIEW

UPC Code 037332187307

PHYSICAL

Rack Height (U Spaces) 12

© 2018 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does

not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:

https://www.tripplite.com/products/product-certification-agencies

Minimum Device Depth (in.) 3

Unit Dimensions (hwd / cm) 63.07 x 60.02 x 44.93

Unit Weight (lbs.) 48.5

Unit Weight (kg) 22.00

Color Black

Weight Capacity - Stationary (lbs.) 200

Cable Access Hole Measurement

(inches)

9.812 x 2.35 (l x w)

Minimum Device Depth (mm) 76

SPECIAL FEATURES

Grounding Lug Front and Back door frames

CERTIFICATIONS