Features
• Single Mini PCI Express Socket for All Features
• Equips 2-Channel Individual CAN and 1-Channel J1708 Interfaces
• Vehicle Communication Protocols: OBD-II,J1939 and J1708
• Built-in u-blox NEO-M8 GPS Module(Optionally Support Untethered Dead Reckoning )
• Support GPS, GLONASS and BeiDou system
• Sensor Integrated: 3D Gyroscope and 3D Accelerometer
Introduction
Apacer in-vehicle mini PCI Express card integrate CAN
bus module and an extension GPS module.
In one mini PCI Express slot , this module can supply
CAN (CAN bus 2.0 a/b, OBDII, J1939, J1708), 3D
Gyroscope, 3D Accelerometer and u-blox GPS features.
Apacer in-vehicle embedded modules optionally
support UDR (Untethered Dead Reckoning GPS)
function. UDR can combine inertial sensing data and
GNSS signals to supply powerful positioning under
poor GPS signal circumstances, such as signal loss in
tunnels, driving in parking facilities, urban canyons,
and where obstructed GPS signals hinder positioning.
Apacer in-vehicle embedded module is the ideal
solution for Fleet Management, Public Transportation
Monitoring, Law Enforcement, In-Vehicle Digital
Signage, Vehicle Data Collection, Vehicle Tracking, and
Telematics System.
Specifications
Dimensions
Europe Apacer Technology B.V. Tel: +31-40-267-0000 Fax: +31-40-290-0686 U.S.A. Apacer Memory America, Inc. Tel: +1-408-518-8699 Fax: 1-510-249-9551
DOC 20161229
Ordering Information
2 Channels CAN 2.0 A/B, G-sensor and u-blox NEO-M8N GPS
2 Channels CAN 2.0 A/B, OBDII, G-sensor and u-blox NEO-M8N GPS
2 Channels CAN 2.0 A/B, OBDII, J1939, G-sensor and u-blox NEO-M8N GPS
2 Channels CAN 2.0 A/B, OBDII, J1939, 1 Channel J1708, G-sensor and u-blox NEO-M8N GPS
2 Channels CAN 2.0 A/B, G-sensor and u-blox NEO-M8U GPS
2 Channels CAN 2.0 A/B, OBDII, G-sensor and u-blox NEO-M8U GPS
2 Channels CAN 2.0 A/B, OBDII, J1939, G-sensor and u-blox NEO-M8U GPS
2 Channels CAN 2.0 A/B, OBDII, J1939, 1 Channel J1708, G-sensor and u-blox NEO-M8U GPS
DescriptionPart Number
APEFC-G10
APEFC-G30
APEFC-G40
APEFC-G50
APEFC-R10
APEFC-R30
APEFC-R40
APEFC-R50
Form Factor Full Mini PCI Express Mini Card with Extension Board
Host Interface USB 2.0 via Mini PCI Express Card Socket
CAN Interface Number
CAN for ISO 11898 x 2 Individual Channels
J1708 x 1 Channel (Optional)
CAN Protocol
CAN 2.0 A/B, OBD-II (ISO 15765-4), J1939 and J1708
Support Mask and Identifi er List Mode
Motion Sensor
3D Gyroscope
3D Accelerometer
GPS Module
u-blox NEO-M8N or M8U
Concurrent Reception Up to 3 GNSS System (GPS, GLONASS,
BeiDou)
Optionally Support Dead Reckoning
Optionally Support External Antenna
Optionally Support Hot Start Positioning
Identifi er fi ltering Mask and Identifi er List Mode
Driver Support
Microsoft Windows 7 / 10
Linux Kernel 2.6 and 3.13
SDK Support
Microsoft Windows 7 / 10
Linux Kernel 2.6 and 3.13
Operation Temp.
-40° C 85° C (without Hot Start Positioning Function)
-20° C 60° C (with Hot Start Positioning Function)
Vibration Test Pass 7.69G@ 202000Hz, compliant with MIL-STD-810G
ESD Protection 8kV Contact, 15kV air
Dimension 50.9 x 30 x 13.2 mm
Apacer In-Vehicle Embedded Modules
