NTCLE101E3103SB0

NTCLE101E3...SB0
www.vishay.com
Vishay BCcomponents
Revision: 12-Jun-17
1
Document Number: 29046
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTC Thermistors, Radial Leaded Special Accuracy
Note
(1)
Response time in silicone oil MS 200/50. This is the time needed
for the sensor to reach 63.2 % of the total temperature
difference when subjected to a temperature change from 25 °C
in air to 85 °C in oil
FEATURES
Excellent accuracy between 25 °C and 85 °C
High stability over a long life
Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Temperature measurement, sensing, and control
DESCRIPTION
These thermistors have a NTC chip soldered between two
tin-plated copper leads. It has a grey lacquered body but is
not insulated. These thermistors have an accuracy of
± 0.5 °C over a trajectory from 25 °C to 85 °C.
PACKAGING
The thermistors are packed in cardboard boxes, each box
contains 500 units.
MARKING
Grey lacquered body.
MOUNTING
By soldering in any position. Not intended for potted
applications.
DESIGN-IN SUPPORT
For complete curve computation, please visit:
www.vishay.com/thermistors/ntc-curve-list/
.
TEMPERATURE ACCURACY GRAPH DIMENSIONS in millimeters
QUICK REFERENCE DATA
PARAMETER VALUE UNIT
Resistance value at 25 °C 4.7K to 100K Ω
Tolerance on R
25
-value ± 2.19 to ± 2.29 %
B
25/85
-value 3977 to 4190 K
Tolerance on B
25/85
-value ± 0.75; ± 1.5 %
Operating temperature range
at zero dissipation
-40 to +125 °C
Accuracy for T measured
between 25 °C and 85 °C
± 0.5 °C
Maximum power dissipation
at 55 °C
250 mW
Dissipation factor δ
(for information only)
7mW/K
Response time
(for information only)
(1)
1.2 s
Thermal time constant τ
(for information only)
11 s
Weight 0.22 g
ELECTRICAL DATA AND ORDERING INFORMATION
R
25
(Ω)
R
25
-TOL.
(± %)
B
25/85
(K)
B
25/85
-TOL.
(± %)
DESCRIPTION
SAP MATERIAL AND
ORDERING NUMBER
4700 2.19 3977 0.75 NTC copper 0.6 lead 4.7K special tol bulk e3 NTCLE101E3472SB0
10 000 2.19 3977 0.75 NTC copper 0.6 lead 10K special tol bulk e3 NTCLE101E3103SB0
47 000 2.23 4090 1.5 NTC copper 0.6 lead 47K special tol bulk e3 NTCLE101E3473SB0
100 000 2.29 4190 1.5 NTC copper 0.6 lead 100K special tol bulk e3 NTCLE101E3104SB0
T
(K)
1.0
-0.5
-1.0
0.5
0
-40 -25 0 25 40 60 85 110 125
T (°C)
2.54
17
min.
3
max.
Ø 0.6
3.3 ± 0.5
5
max.
2 ± 1
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

NTCLE101E3103SB0

Mfr. #:
Manufacturer:
Vishay
Description:
Thermistor NTC 10K Ohm 2.19% 2-Pin Radial 3977K >= -3.5 Box
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union