Figure 7. Recommended Wave Soldering Prole
DISCLAIMER: Avago’s products and software are not specically designed, manufactured or authorized for sale
as parts, components or assemblies for the planning, construction, maintenenace or direct operation of a
nuclear facility or for use in medical devices or applications. Customer is solely responsible, and waives all rights to
make claims against Avago or its suppliers, for all loss, damage, expense or liability in connection with such use.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2014 Avago Technologies. All rights reserved.
AV02-2801EN - July 26, 2014
0 30 40 90 100
250
200
150
100
50
TIME (SECONDS)
PREHEAT
TURBULENT WAVE
LAMINAR WAVE
HOT AIR KNIFE
Recommended solder:
Sn63 (Leaded solder alloy)
SAC305 (Lead-free solder alloy)
Flux: Rosin ux
Solder bath temperature:
245 °C ± 5 °C (maximum peak
temperature = 250 °C)
Dwell time: 1.5 sec - 3.0 sec
(maximum = 3 sec)
Note: Allow for board to be
suciently cooled to room
temperature before you exert
TEMPERATURE (°C)
10 20 706050 80
mechanical force.
