Device Ordering Information
Standard Parts
For further information on line items not listed here or on any aspect of this device,
contact your nearest representative.
Table 16: Part Number Information Scheme
Part Number
Category Category Details
Device type M25P = Serial Flash memory for code storage
Density 128 = 128Mb (16Mb x 8)
Operating voltage V = V
CC
= 2.7V to 3.6V
Package ME = VFDFPN8 8mm x 6mm (MLP8)
MF = SO16W (300 mils width)
Device grade 6 = Industrial temperature range: –40°C to 85°C. Device tested with standard test flow.
Packing option – = Standard packing
T = Tape and reel packing
Plating technology P or G = RoHS-compliant
Lithography B = 65nm SLC
Note:
1. The category of second Level Interconnect is marked on the package and on the inner
box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to
soldering conditions are also marked on the inner box label.
M25P128 Serial Flash Embedded Memory
Device Ordering Information
CCMTD-1718347970-10412
m25p_128.pdf - Rev. A 11/16 EN
41
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.