OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

BGU7004,115

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P20
1. Product profile
1.1 General description
The BGU7004 is, also known as the GPS1103M, an AEC-Q100 qualified Low Noise
Amplifier (LNA) for GNSS receiver applications in a plastic leadless 6-pin, extremely small
SOT886 package. The BGU7004 requires only one external matching inductor and one
external decoupling capacitor.
The BGU7004 adapts itself to the changing environment resulting from co-habitation of
different radio systems in modern cellular handsets. It has been designed for low power
consumption and optimal performance when jamming signals from co-existing cellular
transmitters are present. At low jamming power levels it delivers 16.5 dB gain at a noise
figure of 0.85 dB. During high jamming power levels, resulting for example from a cellular
transmit burst, it temporarily increases its bias current to improve sensitivity.
1.2 Features and benefits
AEC-Q100 qualified (see Section 9.1)
Covers full GNSS L1 band, from 1559 MHz to 1610 MHz
Noise figure (NF) = 0.85 dB and gain (G
p
) = 16.5 dB
High input 1 dB compression point P
i
(1dB) of 11 dBm
High out of band IP3
i
of 9 dBm
Supply voltage 1.5 V to 2.85 V
Power-down mode current consumption < 1 A
Optimized performance at low supply current of 4.5 mA
Integrated matching for the output
Requires only one input matching inductor and one supply decoupling capacitor
Input and output DC decoupled
ESD protection on all pins (HBM > 2 kV)
Integrated temperature stabilized bias for easy design
Small 6-pin leadless package 1 mm 1.45 mm 0.5 mm
110 GHz transit frequency - SiGe:C technology
1.3 Applications
LNA for GPS, GLONASS, Galileo and Compass (BeiDou) in automotive applications
like Toll Collection and Emergency Call.
BGU7004
SiGe:C Low Noise Amplifier MMIC for GPS, GLONASS, Galileo
and Compass
Rev. 3 — 18 January 2017 Product data sheet
;
6
2
1
BGU7004 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2017. All rights reserved.
Product data sheet Rev. 3 — 18 January 2017 2 of 20
NXP Semiconductors
BGU7004
SiGe:C LNA MMIC for GPS, GLONASS, Galileo and Compass
LNA for GPS, GLONASS, Galileo and Compass (BeiDou) in smart phones, feature
phones, tablet PCs, Personal Navigation Devices, Digital Still Cameras, Digital Video
Cameras, RF Front End modules, complete GPS chipset modules and theft protection
(laptop, ATM).
1.4 Quick reference data
[1] PCB losses are substracted.
[2] Including PCB losses.
[3] f
1
= 1713 MHz; f
2
= 1851 MHz; P
1
= P
2
= 30 dBm.
2. Pinning information
Table 1. Quick reference data
f = 1559 MHz to 1610 MHz; V
CC
= 1.8 V; P
i
< 40 dBm; T
amb
= 25 C; input matched to 50 using
a 5.6 nH inductor; unless otherwise specified.
Symbo
l
Parameter Conditions Min Typ Max Unit
V
CC
supply voltage RF input AC coupled 1.5 - 2.85 V
I
CC
supply current V
ENABLE
0.8 V
P
i
< 40 dBm 3.2 4.5 5.7 mA
P
i
= 20 dBm 8.1 11.6 14.4 mA
G
p
power gain P
i
< 40 dBm, no jammer 14 16.5 19 dB
P
i
= 20 dBm, no jammer 15 17.5 20 dB
NF noise figure P
i
< 40 dBm, no jammer
[1]
- 0.85 1.2 dB
P
i
< 40 dBm, no jammer
[2]
- 0.9 1.3 dB
P
i
= 20 dBm, no jammer - 1.2 1.6 dB
P
i(1dB)
input power at 1 dB
gain compression
f = 1559 MHz to 1610 MHz
V
CC
= 1.5 V 15 12 - dBm
V
CC
= 1.8 V 14 11 - dBm
V
CC
= 2.85 V 11 8 - dBm
IP3
i
input third-order intercept point f = 1.575 GHz
V
CC
= 1.5 V
[3]
5 8 - dBm
V
CC
= 1.8 V
[3]
5 9 - dBm
V
CC
= 2.85 V
[3]
5 12 - dBm
Table 2. Pinning
Pin Description Simplified outline Graphic symbol
1 GND
2 GND
3 RF_IN
4V
CC
5 ENABLE
6 RF_OUT
7UDQVSDUHQW
WRSYLHZ
V\P

BGU7004 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2017. All rights reserved.
Product data sheet Rev. 3 — 18 January 2017 3 of 20
NXP Semiconductors
BGU7004
SiGe:C LNA MMIC for GPS, GLONASS, Galileo and Compass
3. Ordering information
4. Marking
5. Limiting values
[1] T
sp
is the temperature at the soldering point of the emitter lead.
[2] Due to internal ESD diode protection, the applied voltage should not exceed the specified maximum in
order to avoid excess current.
[3] The RF input and RF output are AC coupled through internal DC blocking capacitors.
6. Thermal characteristics
Table 3. Ordering information
Type number Package
Name Description Version
BGU7004 XSON6 plastic extremely thin small outline package; no leads;
6 terminals; body 1 1.45 0.5 mm
SOT886
Table 4. Marking codes
Type number Marking code
BGU7004 UY
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage RF input AC coupled 0.5 3.1 V
V
ENABLE
voltage on pin ENABLE V
CC
2.5 V 0.5 3.1 V
V
CC
< 2.5 V
[2]
0.5 V
CC
+ 0.6 V
V
RF_IN
voltage on pin RF_IN DC
V
CC
3.0 V
[3]
0.5 3.6 V
V
CC
< 3.0 V
[2][3]
0.5 V
CC
+ 0.6 V
V
RF_OUT
voltage on pin RF_OUT DC
V
CC
1.8 V
[3]
0.5 3.6 V
V
CC
< 1.8 V
[2][3]
0.5 V
CC
+ 1.8 V
P
i
input power - 0 dBm
P
tot
total power dissipation T
sp
130 C
[1]
55 mW
T
stg
storage temperature 65 150 C
T
j
junction temperature - 150 C
Table 6. Thermal characteristics
Symbol Parameter Conditions Typ Unit
R
th(j-sp)
thermal resistance from junction to solder point 225 K/W
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P20

BGU7004,115

Mfr. #:
Buy BGU7004,115
Manufacturer:
NXP Semiconductors
Description:
RF Amplifier Low Noise Amplifier
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet