TES 2-0523H Datasheet TES 2-0521H, TES 2-0522H, TES 2-1223H | P1-P3

ht tp://www.tracopower.com Page 1 of 4

DC/DC Converter TES 2H Series, 2 Watt

Mod els

• Small SMD package with standard

footprint

• I/O isolatoin voltage 1500 VDC

• Single and dual output models

• Input voltage 5, 12 and 24 VDC

• High efﬁciency up to 80%

• Operating Temperature range

-40 to +85°C

• High accuracy of pin co-planarity

• Qualiﬁed for leadfree reﬂow solder

process according IPC/JEDEC

J-STD-020D

• Available in tape and reel package

• 3-year product warranty

With their small footprint these 2 Watt DC/DC converters are an ideal

and economical solution for many applications where an isolated volt-

age is required. Typical applications are ground loop elimination, noise

reduction, voltage isolation in digital interfaces and voltage conversion

in distributed power systems. With a new package design these con-

verters are qualiﬁed for the higher temperatures requested by lead-

free reﬂow solder processes. For automated SMD production lines the

devices can be supplied in standard tape and reel package.

Order code Input voltage Output voltage Output current max. Efﬁciency typ.

TES 2-0510H

3.3 VDC 500 mA 70 %

TES 2-0511H

5.0 VDC 400 mA 73 %

TES 2-0512H 5 VDC ±10%

12 VDC 165 mA 77 %

TES 2-0521H (5 VDC nominal)

±5 VDC ±200 mA 74 %

TES 2-0522H

±12 VDC ±83 mA 76 %

TES 2-0523H

±15 VDC ±66 mA 76 %

TES 2-1210H

3.3 VDC 500 mA 72 %

TES 2-1211H 12 VDC ±10%

5.0 VDC 400 mA 75 %

TES 2-1212H (12 VDC nominal)

12 VDC 165 mA 79 %

TES 2-1222H

±12 VDC ±83 mA 80 %

TES 2-1223H

±15 VDC ±66 mA 80 %

TES 2-2410H

3.3 VDC 500 mA 72 %

TES 2-2411H 24 VDC ±10%

5.0 VDC 400 mA 75 %

TES 2-2412H (24 VDC nominal)

12 VDC 165 mA 79 %

TES 2-2422H

±12 VDC ±83 mA 79 %

TES 2-2423H

±15 VDC ±66 mA 79 %

Models

TES 2H Series, 2 Watt

http://www.tracopower.com Page 2 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Input Specifications

Input current no load / full load 5 Vin; 3.3 VDC model: 60 mA / 470 mA typ.

5 Vin; other models: 60 mA / 540 mA typ.

12 Vin; 3.3 VDC model: 30 mA / 190 mA typ.

12 Vin; other models: 30 mA / 210 mA typ.

24 Vin; 3.3 VDC model: 15 mA / 95 mA typ.

24 Vin; other models: 15 mA / 110 mA typ.

Surge voltage (1 sec. max.) 5 Vin models: 9 V max.

12 Vin models: 18 V max.

24 Vin models: 30 V max.

Under voltage shut down 12 Vin models: 8 VDC typ.

24 Vin models: 16 VDC typ.

48 Vin models: 34 VDC typ.

Reverse voltage protection 0.3 A max.

Input filter internal capacitor

Output Specifications

Voltage set accuracy see graphs below

Voltage balance (dual output models, balanced load) 1 % max.

Regulation – Input variation 1.2 % / 1 % change Vin

– Load variation 0 – 100 % see graphs below

Minimum load not required

Ripple and noise (20 MHz Bandwidth) 120 mVp-p max.

Temperature coefficient ±0.02 %/K typ.

Short circuit protection limited 0.5s max.

Capacitive load 3.3 & 5.0 VDC models: 47 µF max.

12 & ±5 VDC models: 10 µF max.

±12 & ±15 VDC models: 4.7 µF max.

General Specifications

Temperature ranges – Operating (convection cooling 20LFM, 0,1m/s) –40°C to +85°C

– Case temperature +95°C max.

– Storage temperature –40°C to +125°C

Derating (convection cooling) 4 %/K above 75°C

Humidity (non condensing) 95 % rel H max.

Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >2‘000‘000 h

Isolation voltage (60 sec.) 1’500 VDC

Isolation capacitance (100 kHz, 1V) 60 pF typ.

Isolation resistance (500 VDC) >10 Gohm

Switching frequency 50 to 120 kHz typ. (depend on load)

Physical Specifications

Casing material plastic (UL94V-0 rated)

Weight single output models: 1.5 g (0.05 oz)

dual output models: 2.2 g (0.08 oz)

Lead-free reflow solder process as per J-STD-020BD.1 (www.jedec.org)

Moisture sensivity level (MSL) level 2 as per J-STD-033B.1 (to find at:

www.jedec.org - free registration required)

Washing process not recommended. Product non-hermetical

Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

TES 2H Series, 2 Watt

http://www.tracopower.com Page 3 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Outline Dimensions

Pin Single

–Vin (GND)

+Vin (Vcc)

–Vout

+Vout

No con.

Pin-Out

Dimensions in [mm], () = Inch

Pin pitch tolearnce: ±0.13 (0.005)

Other tolerances: ±0.25 (0.001)

3.04 2.54 5.08

(0.12) (0.10) (0.20)

0.30 (0.01)

8.9 (0.35)

9.3 (0.37)

13.7 (0.54)

12 4

0.25

0-4°

1.5 (0.06)

6.15 (0.24)

12.3 (0.48)

6.15 (0.24)

0.6 (0.02)

1.8 (0.06)

2.54

(0.10)

13.1 (0.52)

1.3 (0.04)

Solder Pad

5.08

(0.20)

3.0

(0.12)

3.0(0.12) (

0.04)

1.0 vent hole (for reow soldering process)

No con. = Pin to be

isolated from circuit

Supporting documents: www.tracopower.com/overview/tes2h

Single Output Models

100%20%0

-10%

+10%

Deviation of Vout nom.

Output Load

max

min.

typ.

+20%

+5%

-5%

+15%

40% 60% 80%

100%20%0

-10%

+10%

Deviation of Vout nom.

Output Load

max

min.

typ.

+20%

+5%

-5%

+15%

40% 60% 80%

3.3 & 5.0 VDC models:

Output voltage variation dependent on load (at nominal input voltage)

other models:

P1-P3 P4-P4

TES 2-0523H

Mfr. #:

Buy TES 2-0523H

Manufacturer:

TRACO Power

Description:

Isolated DC/DC Converters

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

TES 2-0523H

TES 2-0523H

Products related to this Datasheet