DFR0329 Datasheet DFR0329 | P4-P6

QuickStart

In this section, we will guide you how to use Bluno M3 step by step.

SetupSoftwareDevelopmentEnvironment

1. Download IDE and Bluno M3 Driver

Download Bluno M3 Arduino IDE —— Arduino IDE 1.5.5 (M3 Version) from OneDrive

https://onedrive.live.com/redir?resid=7B63697962CC93EA!133&authkey=!AEO3Nnxvjvxcmtk&ithint=

folder%2cpdf

This is a custom version based on Arduino IDE 1.5.5 where we have redefined the interface

functions. Please note that because of this, other versions are not compatible with Bluno M3.

2. Install Software

 Download Arduino IDE (Bluno M3 version) and extract the files to your computer.

 Configure Environment Variables

1. Open Control Panel > System and Security > System > Advanced System Settings >

Environment Variables

2. Select PATH, and click Edit... button

3. Copy the Arduino IDE 1.5.5 (Bluno M3 Version) directory path you downloaded before in

to PATH. For example: C:\Arduino\hardware\tools\avr\utils\bin. Click OK.

Note: If there are a lot of directories in PATH, you can use ";"(semicolon) to split them.

InstallBlunoM3Driver

1. Connect Bluno M3 to your PC's USB port, open Hardware Devices and select the Driver

folder.

Note: The Driver folder is located in your Arduino IDE 1.5.5 (Bluno M3 version) hardware

drivers folder.

e.g. C:\Arduino\hardware\drivers

BlinkanLED

1) Open Arduino IDE 1.5.5 (Bluno M3 Version)

2) Select "Bluno M3" and COM port

Mfr. #:

Manufacturer:

DFRobot

Description:

Development Boards & Kits - ARM Bluno M3

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union