1
05-2015, Rev. 0515
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
Low Power PCB Relays
Miniature PCB Relay RE
n
1 pole 6 A, 1 form A (NO) contact
n
Sensitive coil 200 mW
n
4 kV coil-contact
n
Optimized height 10.6mm
n
PCB area 200mm
2
n
Wash tight
n
Product in accordance to IEC 60335-1 (domestic appliances)
Typical applications
PLC’s, timers, temperature control, I/O cards, white goods.
Approvals
VDE Cert. No. 40010578, UL E214025
Technical data of approved types on request.
Contact Data
Contact arrangement 1 form A (NO)
Rated voltage 250VAC
Max. switching voltage 400VAC
Rated current 6A
Limiting making current, max 4s, duty factor 10% 15A
Breaking capacity max. 1500VA
Contact material AgCdO, AgNi 0.15, AgNi 90/10
Frequency of operation, with/without load 360/72000 ops./h
Operate/release time max. 10/5ms
Bounce time max. 4ms
Contact ratings
Type Contact Load Cycles
IEC 61810
RE030 A (NO) 6A, 250VAC, cosφ=1, 70°C 100x10
3
RE034 A (NO) 6A, 250VAC, cosφ=1, 70°C 100x10
3
UL 508
RE030 A (NO) 1/4 hp, 240VAC, motor 40°C 30x10
3
RE030 A (NO) B300 pilot duty 40°C 6x10
3
RE034 A (NO) 6A, 250VAC,general purpose, 70°C 100x10
3
RE034 A (NO) B300 pilot duty 40°C 6x10
3
Mechanical endurance >30x10
6
ops.
Coil Data
Coil voltage range 5 to 48 VDC
Operative range, IEC 61810 2
Coil insulation system according UL1446 F
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10%
1)
mW
5 5 3.5 0.5 125 200
6 6 4.2 0.6 180 200
12 12 8.4 1.2 720 200
18 18 12.6 1.8 1620 200
24 24 16.8 2.4 2880
1)
200
48 48 33.6 4.8 11520
1)
200
1)
Coil resistance ±15%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts 1000V
rms
between contact and coil 4000V
rms
Initial insulation resistance
open contact circuit >10x10
9
Ω
coil-contact circuit >10x10
9
Ω
Clearance/creepage
between contact and coil ≥4/4mm
Material group of insulation parts IIIa
Tracking index of relay base PTI250V
