ACPL-K49T-560E Datasheet ACPL-K49T-560E, ACPL-K49T-500E, ACPL-K49T-000E | P1-P3

ACPL-K49T

Wide Operating Temperature Automotive R

Coupler

20 kBd Digital

Optocoupler Congurable as Low Power, Low Leakage Phototransistor

Data Sheet

Lead (Pb) Free

RoHS 6 fully

compliant

RoHS 6 fully compliant options available;

-xxxE denotes a lead-free product

Description

The ACPL-K49T is a single channel, high temperature,

high CMR, 20 kBd digital optocoupler, congurable as

a low power, low leakage phototransistor, specically

for use in automotive applications. The stretched SO-8

stretched package outline is designed to be compatible

with standard surface mount processes.

This digital optocoupler uses an insulating layer between

the light emitting diode and an integrated photo detector

to provide electrical insulation between input and output.

Separate connections for the photodiode bias and output

transistor collector increase the speed up to a hundred

times over that of a conventional photo-transistor coupler

by reducing the base-collector capacitance.

Avago R

Coupler isolation product provides with rein-

forced insulation and reliability that delivers safe signal

isolation critical in automotive and high temperature in-

dustrial applications

Functional Diagram

Features

• High Temperature and Reliability low speed digital

interface for Automotive Application.

• 30 kV/ms High Common-Mode Rejection at V

= 1500 V

(typ)

• Low Power, Low Leakage Phototransistor in a “4-pin

Conguration”

• Compact, Auto-Insertable Stretched SO8 Packages

• Qualied to AEC Q100 Grade 1 Test Guidelines

• Wide Temperature Range: -40° C to +125° C

• Low LED Drive Current: 4 mA (typ)

• Low Propagation Delay: 20 ms (max)

• Worldwide Safety Approval:

– UL 1577 approval, 5 kV

RMS

/1 min.

– CSA Approval

– IEC/EN/DIN EN 60747-5-5

Applications

• Automotive Low Speed Digital Signal Isolation Interface

• Inverter Fault Feedback Signal Isolation

• Switching Power Supplies Feedback Circuit

Note: The connection of a 0.1 mF

bypass capacitor between pins 5

and 8 is recommended for 5-pin

conguration.

Note: Pins 7 and 8 are externally

shorted for 4-pin conguration.

GND

ANODE

CATHODE

GND

ANODE

CATHODE

Truth Table

LED Vo

ON LOW

OFF HIGH

CAUTION: It is advised that normal static precautions be taken in handling and assembly

of this component to prevent damage and/or degradation which may be induced by ESD.

Ordering Information

Specify part number followed by option number (if desired).

Part number

Option

(RoHS Compliant) Package

Surface

Mount

Tape

& Reel

UL 5000 V

rms

1 Minute rating

IEC/EN/DIN EN

60747-5-5 Quantity

ACPL-K49T -000E Stretched

SO-8

X X 80 per tube

-060E X X X 80 per tube

-500E X X X 1000 per reel

-560E X X X X 1000 per reel

To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry.

Example 1:

ACPL-K49T-560E to order product of SSO-8 Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN

60747-5-5 Safety Approval in RoHS compliant.

Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.

Outline Drawing (Stretched SO8)

5.850 ± 0.254

(0.230 ± 0.010)

678

4321

Dimensions in millimeters and (inches).

Note:

Lead coplanarity = 0.1 mm (0.004 inches).

Floating lead protrusion = 0.25mm (10mils) max.

6.807 ± 0.127

(0.268 ± 0.005)

RECOMMENDED LAND PATTERN

12.650

(0.498)

1.905

(0.075)

3.180 ± 0.127

(0.125 ± 0.005)

0.381 ± 0.127

(0.015 ± 0.005)

1.270

(0.050) BSG

7°

0.254 ± 0.100

(0.010 ± 0.004)

0.750 ± 0.250

(0.0295 ± 0.010)

11.50 ± 0.250

(0.453 ± 0.010)

1.590 ± 0.127

(0.063 ± 0.005)

0.450

(0.018)

45°

RoHS-COMPLIANCE

INDICATOR

0.64

(0.025)

0.200 ± 0.100

(0.008 ± 0.004)

PART NUMBER

DATE CODE

KXXT

YWW

EXTENDED DATECODE

FOR LOT TRACKING

Recommended Pb-Free IR Reow Prole

Recommended reow condition as per JEDEC Standard, J-STD-020 (latest revision).

Note: Non-halide ux should be used

Regulatory Information

The ACPL-K49T is approved by the following organizations:

Approval under UL 1577, component recognition program up to V

ISO

= 5 kV

RMS

CSA

Approval under CSA Component Acceptance Notice #5.

IEC/EN/DIN EN 60747-5-5

Approval under IEC/EN/DIN EN 60747-5-5

Insulation and Safety Related Specications

Parameter Symbol ACPL-K49T Units Conditions

Minimum External Air Gap

(Clearance)

L(101) 8 mm Measured from input terminals to output terminals, shortest

distance through air.

Minimum External Tracking

(Creepage)

L(102) 8 mm Measured from input terminals to output terminals, shortest

distance path along body.

Minimum Internal Plastic Gap

(Internal Clearance)

0.08 mm Through insulation distance conductor to conductor, usually

the straight line distance thickness between the emitter and

detector.

Tracking Resistance

(Comparative Tracking Index)

CTI 175 V DIN IEC 112/VDE 0303 Part 1

Isolation Group (DIN VDE0109) IIIa Material Group (DIN VDE 0109)

IEC/EN/DIN EN 60747-5-5 Insulation Related Characteristic (Option 060E and 560E)

Description Symbol Characteristic Units

Installation classication per DIN VDE 0110/1.89, Table 1

for rated mains voltage ≤ 150 V

rms

for rated mains voltage ≤ 300 V

rms

for rated mains voltage ≤ 450 V

rms

for rated mains voltage ≤ 600 V

rms

for rated mains voltage ≤ 1000 V

rms

I-IV

I-III

Climatic Classication 55/100/21

Pollution Degree (DIN VDE 0110/1.89) 2

Maximum Working Insulation Voltage V

IORM

1140 V

PEAK

Input to Output Test Voltage, Method b

IORM

x 1.875 = V

, 100% Production Test with t

= 1 sec

Partial Discharge < 5 pC

2137 V

PEAK

Input to Output Test Voltage, Method a

IORM

x 1.6 = V

, Type and sample test, t

= 10 sec,

Partial Discharge < 5 pC

1824 V

PEAK

Highest Allowable Overvoltage (Transient Overvoltage, t

ini

= 60 sec) V

IOTM

8000 V

PEAK

Safety Limiting Values (Maximum values allowed in the event of a failure)

Case Temperature

Input Current

Output Power

S,INPUT

S,OUTPUT

175

230

600

°C

Insulation Resistance at T

, V

= 500 V R

Ω

P1-P3 P4-P6 P7-P9

ACPL-K49T-560E

Mfr. #:

Buy ACPL-K49T-560E

Manufacturer:

Broadcom / Avago

Description:

High Speed Optocouplers Optocoupler

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

ACPL-K49T-560E

ACPL-K49T-560E

Products related to this Datasheet